lkml.org 
[lkml]   [2021]   [Jan]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V1] clk: qcom: gcc-sc7180: Mark the MM XO clocks to be always ON
From
Date
Il 20/01/21 08:47, Taniya Das ha scritto:
> There are intermittent GDSC power-up failures observed for titan top
> gdsc, which requires the XO clock. Thus mark all the MM XO clocks always
> enabled from probe.
>

Hello Tanya,

> Fixes: 8d4025943e13 ("clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones")
> Signed-off-by: Taniya Das <tdas@codeaurora.org>
> ---
> drivers/clk/qcom/gcc-sc7180.c | 47 ++++---------------------------------------
> 1 file changed, 4 insertions(+), 43 deletions(-)
>
> --
> Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
> of the Code Aurora Forum, hosted by the Linux Foundation.
>
> diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c
> index b05901b..88e896a 100644
> --- a/drivers/clk/qcom/gcc-sc7180.c
> +++ b/drivers/clk/qcom/gcc-sc7180.c
> @@ -1,6 +1,6 @@
> // SPDX-License-Identifier: GPL-2.0-only
> /*
> - * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2019-2021, The Linux Foundation. All rights reserved.
> */
>
> #include <linux/clk-provider.h>
> @@ -919,19 +919,6 @@ static struct clk_branch gcc_camera_throttle_hf_axi_clk = {
> },
> };
>
> -static struct clk_branch gcc_camera_xo_clk = {
> - .halt_reg = 0xb02c,
> - .halt_check = BRANCH_HALT,
> - .clkr = {
> - .enable_reg = 0xb02c,
> - .enable_mask = BIT(0),
> - .hw.init = &(struct clk_init_data){
> - .name = "gcc_camera_xo_clk",
> - .ops = &clk_branch2_ops,
> - },
> - },
> -};
> -

Why are you avoiding to register these clocks entirely?
If this is needed by the Titan GDSC, this clock "does indeed exist".

If these clocks shall never be turned off, then you should add the
CLK_IS_CRITICAL flag and perhaps add a comment explaining why.

> static struct clk_branch gcc_ce1_ahb_clk = {
> .halt_reg = 0x4100c,
> .halt_check = BRANCH_HALT_VOTED,
> @@ -1096,19 +1083,6 @@ static struct clk_branch gcc_disp_throttle_hf_axi_clk = {
> },
> };
>
> -static struct clk_branch gcc_disp_xo_clk = {
> - .halt_reg = 0xb030,
> - .halt_check = BRANCH_HALT,
> - .clkr = {
> - .enable_reg = 0xb030,
> - .enable_mask = BIT(0),
> - .hw.init = &(struct clk_init_data){
> - .name = "gcc_disp_xo_clk",
> - .ops = &clk_branch2_ops,
> - },
> - },
> -};
> -

Same here.

> static struct clk_branch gcc_gp1_clk = {
> .halt_reg = 0x64000,
> .halt_check = BRANCH_HALT,
> @@ -2159,19 +2133,6 @@ static struct clk_branch gcc_video_throttle_axi_clk = {
> },
> };
>
> -static struct clk_branch gcc_video_xo_clk = {
> - .halt_reg = 0xb028,
> - .halt_check = BRANCH_HALT,
> - .clkr = {
> - .enable_reg = 0xb028,
> - .enable_mask = BIT(0),
> - .hw.init = &(struct clk_init_data){
> - .name = "gcc_video_xo_clk",
> - .ops = &clk_branch2_ops,
> - },
> - },
> -};
> -

...and here.

> static struct clk_branch gcc_mss_cfg_ahb_clk = {
> .halt_reg = 0x8a000,
> .halt_check = BRANCH_HALT,
> @@ -2304,7 +2265,6 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
> [GCC_BOOT_ROM_AHB_CLK] = &gcc_boot_rom_ahb_clk.clkr,
> [GCC_CAMERA_HF_AXI_CLK] = &gcc_camera_hf_axi_clk.clkr,
> [GCC_CAMERA_THROTTLE_HF_AXI_CLK] = &gcc_camera_throttle_hf_axi_clk.clkr,
> - [GCC_CAMERA_XO_CLK] = &gcc_camera_xo_clk.clkr,
> [GCC_CE1_AHB_CLK] = &gcc_ce1_ahb_clk.clkr,
> [GCC_CE1_AXI_CLK] = &gcc_ce1_axi_clk.clkr,
> [GCC_CE1_CLK] = &gcc_ce1_clk.clkr,
> @@ -2317,7 +2277,6 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
> [GCC_DISP_GPLL0_DIV_CLK_SRC] = &gcc_disp_gpll0_div_clk_src.clkr,
> [GCC_DISP_HF_AXI_CLK] = &gcc_disp_hf_axi_clk.clkr,
> [GCC_DISP_THROTTLE_HF_AXI_CLK] = &gcc_disp_throttle_hf_axi_clk.clkr,
> - [GCC_DISP_XO_CLK] = &gcc_disp_xo_clk.clkr,
> [GCC_GP1_CLK] = &gcc_gp1_clk.clkr,
> [GCC_GP1_CLK_SRC] = &gcc_gp1_clk_src.clkr,
> [GCC_GP2_CLK] = &gcc_gp2_clk.clkr,
> @@ -2413,7 +2372,6 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
> [GCC_VIDEO_AXI_CLK] = &gcc_video_axi_clk.clkr,
> [GCC_VIDEO_GPLL0_DIV_CLK_SRC] = &gcc_video_gpll0_div_clk_src.clkr,
> [GCC_VIDEO_THROTTLE_AXI_CLK] = &gcc_video_throttle_axi_clk.clkr,
> - [GCC_VIDEO_XO_CLK] = &gcc_video_xo_clk.clkr,
> [GPLL0] = &gpll0.clkr,
> [GPLL0_OUT_EVEN] = &gpll0_out_even.clkr,
> [GPLL6] = &gpll6.clkr,
> @@ -2510,6 +2468,9 @@ static int gcc_sc7180_probe(struct platform_device *pdev)
> regmap_update_bits(regmap, 0x0b004, BIT(0), BIT(0));
> regmap_update_bits(regmap, 0x0b008, BIT(0), BIT(0));
> regmap_update_bits(regmap, 0x0b00c, BIT(0), BIT(0));
> + regmap_update_bits(regmap, 0x0b02c, BIT(0), BIT(0));
> + regmap_update_bits(regmap, 0x0b028, BIT(0), BIT(0));
> + regmap_update_bits(regmap, 0x0b030, BIT(0), BIT(0));

IMO, "Magic" regmap writes like these ones, even if documented, should
be avoided in this specific case, since the clocks framework accounts
for clocks that should be always-on, if provided with the right flags.

> regmap_update_bits(regmap, 0x71004, BIT(0), BIT(0));
>
> ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks,
>

\
 
 \ /
  Last update: 2021-01-20 11:25    [W:0.070 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site