lkml.org 
[lkml]   [2021]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v1] of: property: Add fw_devlink support for "gpio" and "gpios" binding
Hi Saravana,

On Tue, Jan 19, 2021 at 6:54 PM Saravana Kannan <saravanak@google.com> wrote:
> On Tue, Jan 19, 2021 at 2:20 AM Linus Walleij <linus.walleij@linaro.org> wrote:
> > On Tue, Jan 19, 2021 at 9:50 AM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> > > > Can we pull this into driver-core-next please? It fixes issues on some
> > > > boards with fw_devlink=on.
> > >
> > > On r8a77951-salvator-xs.dts, it introduces one more failure:
> > >
> > > OF: /soc/i2c@e66d8000/gpio@20/pcie-sata-switch-hog: could not get
> > > #gpio-cells for /cpus/cpu@102
>
> Geert,
>
> One good thing is that it's noticing this being weird and ignoring it
> in your particular board. I *think* it interprets the "7" as a phandle
> and that's cpu@102 and realizes it's not a gpio-controller. For at
> least in your case, it's a safe failure.

While 7 is the GPIO index, relative to the current GPIO controller,
represented by the parent device node.

> > > Seems like it doesn't parse gpios properties in GPIO hogs correctly.
> >
> > Could it be that the code assumes no self-referencing phandles?
> > (Just guessing...)
>
> Ok I tried to understand what gpio-hogs means. It's not fully clear to
> me. But it looks like if a gpio-controller has a gpio-hog, then it
> doesn't have/need gpio-cells? Is that right?

A GPIO hog is a way to fix (strap) a GPIO line to a specific value.
Usually this is done to enable a piece of hardware on a board, or
control a mux.

The controller still needs gpio-cells.

> So if a gpio-controller has a gpio-hog, can it ever be referred to by
> another consumer in DT using blah-gpios = ...? If so, I don't see any
> obvious code that's handling the missing gpio-cells in this case.

Yes it can.

> Long story short, please help me understand gpio-hog in the context of
> finding dependencies in DT.

The hog references a GPIO on the current controller. As this is always
the parent device node, the hog's gpios properties lack the phandle.

E.g. a normal reference to the first GPIO of gpio5 looks like:

gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;

A hog on the first GPIO of gpio5 would be a subnode of gpio5,
and would just use:

gpios = <0 GPIO_ACTIVE_LOW>;

instead.

Hope this helps.

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

\
 
 \ /
  Last update: 2021-01-19 19:28    [W:0.078 / U:0.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site