lkml.org 
[lkml]   [2021]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 5.4 18/26] dts: phy: add GPIO number and active state used for phy reset
Date
From: Sagar Shrikant Kadam <sagar.kadam@sifive.com>

[ Upstream commit a0fa9d727043da2238432471e85de0bdb8a8df65 ]

The GEMGXL_RST line on HiFive Unleashed is pulled low and is
using GPIO number 12. Add these reset-gpio details to dt-node
using which the linux phylib can reset the phy.

Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
index cc04e66752aac..1ad3dc2fb6343 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
@@ -85,6 +85,7 @@ &eth0 {
phy0: ethernet-phy@0 {
compatible = "ethernet-phy-id0007.0771";
reg = <0>;
+ reset-gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
};

--
2.27.0
\
 
 \ /
  Last update: 2021-01-20 03:54    [W:1.541 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site