lkml.org 
[lkml]   [2021]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH AUTOSEL 5.10 30/45] dts: phy: add GPIO number and active state used for phy reset
    Date
    From: Sagar Shrikant Kadam <sagar.kadam@sifive.com>

    [ Upstream commit a0fa9d727043da2238432471e85de0bdb8a8df65 ]

    The GEMGXL_RST line on HiFive Unleashed is pulled low and is
    using GPIO number 12. Add these reset-gpio details to dt-node
    using which the linux phylib can reset the phy.

    Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
    Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
    Signed-off-by: Sasha Levin <sashal@kernel.org>
    ---
    arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts | 1 +
    1 file changed, 1 insertion(+)

    diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
    index 60846e88ae4b1..24d75a146e02d 100644
    --- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
    +++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
    @@ -90,6 +90,7 @@ &eth0 {
    phy0: ethernet-phy@0 {
    compatible = "ethernet-phy-id0007.0771";
    reg = <0>;
    + reset-gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
    };
    };

    --
    2.27.0
    \
     
     \ /
      Last update: 2021-01-20 03:41    [W:4.437 / U:0.124 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site