lkml.org 
[lkml]   [2021]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/3] PCI: set dma-can-stall for HiSilicon chip
Date
HiSilicon KunPeng920 and KunPeng930 have devices appear as PCI but are
actually on the AMBA bus. These fake PCI devices can support SVA via
SMMU stall feature, by setting dma-can-stall for ACPI platforms.

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
---
Property dma-can-stall depends on patchset
https://lore.kernel.org/linux-iommu/20210108145217.2254447-1-jean-philippe@linaro.org/

drivers/pci/quirks.c | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 873d27f..b866cdf 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1827,10 +1827,23 @@ DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_HUAWEI, 0x1610, PCI_CLASS_BRIDGE_PCI

static void quirk_huawei_pcie_sva(struct pci_dev *pdev)
{
+ struct property_entry properties[] = {
+ PROPERTY_ENTRY_BOOL("dma-can-stall"),
+ {},
+ };
+
if (pdev->revision != 0x21 && pdev->revision != 0x30)
return;

pdev->pasid_no_tlp = 1;
+
+ /*
+ * Set the dma-can-stall property on ACPI platforms. Device tree
+ * can set it directly.
+ */
+ if (!pdev->dev.of_node &&
+ device_add_properties(&pdev->dev, properties))
+ pci_warn(pdev, "could not add stall property");
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa250, quirk_huawei_pcie_sva);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa251, quirk_huawei_pcie_sva);
--
2.7.4
\
 
 \ /
  Last update: 2021-01-18 10:03    [W:0.055 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site