lkml.org 
[lkml]   [2021]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v1 5/5] driver core: Set fw_devlink=on by default
On Sun, Jan 17, 2021 at 3:01 PM Michael Walle <michael@walle.cc> wrote:
>
> Hi Saravana, again ;)

Hi again! :)

>
> > Cyclic dependencies in some firmware was one of the last remaining
> > reasons fw_devlink=on couldn't be set by default. Now that cyclic
> > dependencies don't block probing, set fw_devlink=on by default.
> >
> > Setting fw_devlink=on by default brings a bunch of benefits (currently,
> > only for systems with device tree firmware):
> > * Significantly cuts down deferred probes.
> > * Device probe is effectively attempted in graph order.
> > * Makes it much easier to load drivers as modules without having to
> > worry about functional dependencies between modules (depmod is still
> > needed for symbol dependencies).
> >
> > If this patch prevents some devices from probing, it's very likely due
> > to the system having one or more device drivers that "probe"/set up a
> > device (DT node with compatible property) without creating a struct
> > device for it. If we hit such cases, the device drivers need to be
> > fixed so that they populate struct devices and probe them like normal
> > device drivers so that the driver core is aware of the devices and their
> > status. See [1] for an example of such a case.
> >
> > [1] - https://lore.kernel.org/lkml/CAGETcx9PiX==mLxB9PO8Myyk6u2vhPVwTMsA5NkD-ywH5xhusw@mail.gmail.com/
> > Signed-off-by: Saravana Kannan <saravanak@google.com>
>
> This breaks (at least) probing of the PCIe controllers of my board. The
> driver in question is
> drivers/pci/controller/dwc/pci-layerscape.c
> I've also put the maintainers of this driver on CC. Looks like it uses a
> proper struct device. But it uses builtin_platform_driver_probe() and
> apparently it waits for the iommu which uses module_platform_driver().
> Dunno if that will work together.

Yeah, the builtin vs module doesn't matter. I've had fw_devlink work
multiple times with the consumer driver being built in and the
supplier actually loaded as a module. Making that work is one of the
goals of fw_devlink.

> The board device tree can be found here:
> arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
>
> Attached is the log with enabled "probe deferral" messages enabled.

I took a look at the logs. As you said, pci seems to be waiting on
iommu, but it's not clear why the iommu didn't probe by then. Can you
add initcall_debug=1 and enable the logs in device_link_add()? Btw, I
realize one compromise on the logs is to send them as an attachment
instead of inline. That way, it's still archived in the list, but I
don't have to deal with log lines getting wrapped, etc.

Thanks for reporting the issues. Also, could you try picking up all of
these changes and giving it a shot. It's unlikely to help, but I want
to rule out issues related to fixes in progress.

https://lore.kernel.org/lkml/20210116011412.3211292-1-saravanak@google.com/
https://lore.kernel.org/lkml/20210115210159.3090203-1-saravanak@google.com/
https://lore.kernel.org/lkml/20201218210750.3455872-1-saravanak@google.com/

Thanks,
Saravana

\
 
 \ /
  Last update: 2021-01-18 22:11    [W:0.266 / U:2.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site