lkml.org 
[lkml]   [2021]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net 1/2] ipv6: create multicast route with RTPROT_KERNEL
Date
From: Matteo Croce <mcroce@microsoft.com>

The ff00::/8 multicast route is created without specifying the fc_protocol
field, so the default RTPROT_BOOT value is used:

$ ip -6 -d route
unicast ::1 dev lo proto kernel scope global metric 256 pref medium
unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium
unicast ff00::/8 dev eth0 proto boot scope global metric 256 pref medium

As the documentation says, this value identifies routes installed during
boot, but the route is created when interface is set up.
Change the value to RTPROT_KERNEL which is a better value.

Signed-off-by: Matteo Croce <mcroce@microsoft.com>
---
net/ipv6/addrconf.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index eff2cacd5209..19bf6822911c 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -2469,6 +2469,7 @@ static void addrconf_add_mroute(struct net_device *dev)
.fc_flags = RTF_UP,
.fc_type = RTN_UNICAST,
.fc_nlinfo.nl_net = dev_net(dev),
+ .fc_protocol = RTPROT_KERNEL,
};

ipv6_addr_set(&cfg.fc_dst, htonl(0xFF000000), 0, 0, 0);
--
2.29.2
\
 
 \ /
  Last update: 2021-01-15 19:46    [W:0.129 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site