lkml.org 
[lkml]   [2021]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v13 00/15] SMMUv3 Nested Stage Setup (IOMMU part)
From
Date
Hi Shameer,

On 1/8/21 6:05 PM, Shameerali Kolothum Thodi wrote:
> Hi Eric,
>
>> -----Original Message-----
>> From: Eric Auger [mailto:eric.auger@redhat.com]
>> Sent: 18 November 2020 11:22
>> To: eric.auger.pro@gmail.com; eric.auger@redhat.com;
>> iommu@lists.linux-foundation.org; linux-kernel@vger.kernel.org;
>> kvm@vger.kernel.org; kvmarm@lists.cs.columbia.edu; will@kernel.org;
>> joro@8bytes.org; maz@kernel.org; robin.murphy@arm.com;
>> alex.williamson@redhat.com
>> Cc: jean-philippe@linaro.org; zhangfei.gao@linaro.org;
>> zhangfei.gao@gmail.com; vivek.gautam@arm.com; Shameerali Kolothum
>> Thodi <shameerali.kolothum.thodi@huawei.com>;
>> jacob.jun.pan@linux.intel.com; yi.l.liu@intel.com; tn@semihalf.com;
>> nicoleotsuka@gmail.com; yuzenghui <yuzenghui@huawei.com>
>> Subject: [PATCH v13 00/15] SMMUv3 Nested Stage Setup (IOMMU part)
>>
>> This series brings the IOMMU part of HW nested paging support
>> in the SMMUv3. The VFIO part is submitted separately.
>>
>> The IOMMU API is extended to support 2 new API functionalities:
>> 1) pass the guest stage 1 configuration
>> 2) pass stage 1 MSI bindings
>>
>> Then those capabilities gets implemented in the SMMUv3 driver.
>>
>> The virtualizer passes information through the VFIO user API
>> which cascades them to the iommu subsystem. This allows the guest
>> to own stage 1 tables and context descriptors (so-called PASID
>> table) while the host owns stage 2 tables and main configuration
>> structures (STE).
>
> I am seeing an issue with Guest testpmd run with this series.
> I have two different setups and testpmd works fine with the
> first one but not with the second.
>
> 1). Guest doesn't have kernel driver built-in for pass-through dev.
>
> root@ubuntu:/# lspci -v
> ...
> 00:02.0 Ethernet controller: Huawei Technologies Co., Ltd. Device a22e (rev 21)
> Subsystem: Huawei Technologies Co., Ltd. Device 0000
> Flags: fast devsel
> Memory at 8000100000 (64-bit, prefetchable) [disabled] [size=64K]
> Memory at 8000000000 (64-bit, prefetchable) [disabled] [size=1M]
> Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00
> Capabilities: [a0] MSI-X: Enable- Count=67 Masked-
> Capabilities: [b0] Power Management version 3
> Capabilities: [100] Access Control Services
> Capabilities: [300] Transaction Processing Hints
>
> root@ubuntu:/# echo vfio-pci > /sys/bus/pci/devices/0000:00:02.0/driver_override
> root@ubuntu:/# echo 0000:00:02.0 > /sys/bus/pci/drivers_probe
>
> root@ubuntu:/mnt/dpdk/build/app# ./testpmd -w 0000:00:02.0 --file-prefix socket0 -l 0-1 -n 2 -- -i
> EAL: Detected 8 lcore(s)
> EAL: Detected 1 NUMA nodes
> EAL: Multi-process socket /var/run/dpdk/socket0/mp_socket
> EAL: Selected IOVA mode 'VA'
> EAL: No available hugepages reported in hugepages-32768kB
> EAL: No available hugepages reported in hugepages-64kB
> EAL: No available hugepages reported in hugepages-1048576kB
> EAL: Probing VFIO support...
> EAL: VFIO support initialized
> EAL: Invalid NUMA socket, default to 0
> EAL: using IOMMU type 1 (Type 1)
> EAL: Probe PCI driver: net_hns3_vf (19e5:a22e) device: 0000:00:02.0 (socket 0)
> EAL: No legacy callbacks, legacy socket not created
> Interactive-mode selected
> testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=155456, size=2176, socket=0
> testpmd: preferred mempool ops selected: ring_mp_mc
>
> Warning! port-topology=paired and odd forward ports number, the last port will pair with itself.
>
> Configuring Port 0 (socket 0)
> Port 0: 8E:A6:8C:43:43:45
> Checking link statuses...
> Done
> testpmd>
>
> 2). Guest have kernel driver built-in for pass-through dev.
>
> root@ubuntu:/# lspci -v
> ...
> 00:02.0 Ethernet controller: Huawei Technologies Co., Ltd. Device a22e (rev 21)
> Subsystem: Huawei Technologies Co., Ltd. Device 0000
> Flags: bus master, fast devsel, latency 0
> Memory at 8000100000 (64-bit, prefetchable) [size=64K]
> Memory at 8000000000 (64-bit, prefetchable) [size=1M]
> Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00
> Capabilities: [a0] MSI-X: Enable+ Count=67 Masked-
> Capabilities: [b0] Power Management version 3
> Capabilities: [100] Access Control Services
> Capabilities: [300] Transaction Processing Hints
> Kernel driver in use: hns3
>
> root@ubuntu:/# echo vfio-pci > /sys/bus/pci/devices/0000:00:02.0/driver_override
> root@ubuntu:/# echo 0000:00:02.0 > /sys/bus/pci/drivers/hns3/unbind
> root@ubuntu:/# echo 0000:00:02.0 > /sys/bus/pci/drivers_probe
>
> root@ubuntu:/mnt/dpdk/build/app# ./testpmd -w 0000:00:02.0 --file-prefix socket0 -l 0-1 -n 2 -- -i
> EAL: Detected 8 lcore(s)
> EAL: Detected 1 NUMA nodes
> EAL: Multi-process socket /var/run/dpdk/socket0/mp_socket
> EAL: Selected IOVA mode 'VA'
> EAL: No available hugepages reported in hugepages-32768kB
> EAL: No available hugepages reported in hugepages-64kB
> EAL: No available hugepages reported in hugepages-1048576kB
> EAL: Probing VFIO support...
> EAL: VFIO support initialized
> EAL: Invalid NUMA socket, default to 0
> EAL: using IOMMU type 1 (Type 1)
> EAL: Probe PCI driver: net_hns3_vf (19e5:a22e) device: 0000:00:02.0 (socket 0)
> 0000:00:02.0 hns3_get_mbx_resp(): VF could not get mbx(11,0) head(1) tail(0) lost(1) from PF in_irq:0
> hns3vf_get_queue_info(): Failed to get tqp info from PF: -62
> hns3vf_init_vf(): Failed to fetch configuration: -62
> hns3vf_dev_init(): Failed to init vf: -62
> EAL: Releasing pci mapped resource for 0000:00:02.0
> EAL: Calling pci_unmap_resource for 0000:00:02.0 at 0x1100800000
> EAL: Calling pci_unmap_resource for 0000:00:02.0 at 0x1100810000
> EAL: Requested device 0000:00:02.0 cannot be used
> EAL: Bus (pci) probe failed.
> EAL: No legacy callbacks, legacy socket not created
> testpmd: No probed ethernet devices
> Interactive-mode selected
> testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=155456, size=2176, socket=0
> testpmd: preferred mempool ops selected: ring_mp_mc
> Done
> testpmd>
>
> And in this case, smmu(host) reports a translation fault,
>
> [ 6542.670624] arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received:
> [ 6542.670630] arm-smmu-v3 arm-smmu-v3.2.auto: 0x00007d1200000010
> [ 6542.670631] arm-smmu-v3 arm-smmu-v3.2.auto: 0x000012000000007c
> [ 6542.670633] arm-smmu-v3 arm-smmu-v3.2.auto: 0x00000000fffef040
> [ 6542.670634] arm-smmu-v3 arm-smmu-v3.2.auto: 0x00000000fffef000
>
> Tested with Intel 82599 card(ixgbevf) as well. but same errror.
>
> Not able to root cause the problem yet. With the hope that, this is
> related to tlb entries not being invlaidated properly, I tried explicitly
> issuing CMD_TLBI_NSNH_ALL and CMD_CFGI_CD_ALL just before
> the STE update, but no luck yet :(
>
> Please let me know if I am missing something here or has any clue if you
> can replicate this on your setup.

Thank for for the report. I need to setup the DPDK environment again and
I will test on my end. I plan to respin next week and study all the
issues you reported up to now. I will rebase on Jean's last branch.

Thanks

Eric
>
> Thanks,
> Shameer
>
>>
>> Best Regards
>>
>> Eric
>>
>> This series can be found at:
>> https://github.com/eauger/linux/tree/5.10-rc4-2stage-v13
>> (including the VFIO part in his last version: v11)
>>
>> The series includes a patch from Jean-Philippe. It is better to
>> review the original patch:
>> [PATCH v8 2/9] iommu/arm-smmu-v3: Maintain a SID->device structure
>>
>> The VFIO series is sent separately.
>>
>> History:
>>
>> v12 -> v13:
>> - fixed compilation issue with CONFIG_ARM_SMMU_V3_SVA
>> reported by Shameer. This urged me to revisit patch 4 into
>> iommu/smmuv3: Allow s1 and s2 configs to coexist where
>> s1_cfg and s2_cfg are not dynamically allocated anymore.
>> Instead I use a new set field in existing structs
>> - fixed 2 others config checks
>> - Updated "iommu/arm-smmu-v3: Maintain a SID->device structure"
>> according to the last version
>>
>> v11 -> v12:
>> - rebase on top of v5.10-rc4
>>
>> Eric Auger (14):
>> iommu: Introduce attach/detach_pasid_table API
>> iommu: Introduce bind/unbind_guest_msi
>> iommu/smmuv3: Allow s1 and s2 configs to coexist
>> iommu/smmuv3: Get prepared for nested stage support
>> iommu/smmuv3: Implement attach/detach_pasid_table
>> iommu/smmuv3: Allow stage 1 invalidation with unmanaged ASIDs
>> iommu/smmuv3: Implement cache_invalidate
>> dma-iommu: Implement NESTED_MSI cookie
>> iommu/smmuv3: Nested mode single MSI doorbell per domain enforcement
>> iommu/smmuv3: Enforce incompatibility between nested mode and HW MSI
>> regions
>> iommu/smmuv3: Implement bind/unbind_guest_msi
>> iommu/smmuv3: Report non recoverable faults
>> iommu/smmuv3: Accept configs with more than one context descriptor
>> iommu/smmuv3: Add PASID cache invalidation per PASID
>>
>> Jean-Philippe Brucker (1):
>> iommu/arm-smmu-v3: Maintain a SID->device structure
>>
>> drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 659
>> ++++++++++++++++++--
>> drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h | 103 ++-
>> drivers/iommu/dma-iommu.c | 142 ++++-
>> drivers/iommu/iommu.c | 105 ++++
>> include/linux/dma-iommu.h | 16 +
>> include/linux/iommu.h | 41 ++
>> include/uapi/linux/iommu.h | 54 ++
>> 7 files changed, 1042 insertions(+), 78 deletions(-)
>>
>> --
>> 2.21.3
>

\
 
 \ /
  Last update: 2021-01-13 16:40    [W:0.712 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site