lkml.org 
[lkml]   [2021]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: "UBSAN: shift-out-of-bounds in mceusb_dev_recv" should share the same root cause with "UBSAN: shift-out-of-bounds in mceusb_dev_printdata"
On Wed, Jan 13, 2021 at 01:04:44PM +0800, 慕冬亮 wrote:
> Hi developers,
>
> I found that "UBSAN: shift-out-of-bounds in mceusb_dev_recv" and
> "UBSAN: shift-out-of-bounds in mceusb_dev_printdata" should share the
> same root cause.
> The reason is that the PoCs after minimization has a high similarity
> with the other. And their stack trace only diverges at the last
> function call. The following is some analysis for this bug.
>
> The following code in the mceusb_process_ir_data is the vulnerable
> --------------------------------------------------------------------------------------------------------------------------
> for (; i < buf_len; i++) {
> switch (ir->parser_state) {
> case SUBCMD:
> ir->rem = mceusb_cmd_datasize(ir->cmd, ir->buf_in[i]);
> mceusb_dev_printdata(ir, ir->buf_in, buf_len, i - 1,
> ir->rem + 2, false);
> if (i + ir->rem < buf_len)
> mceusb_handle_command(ir, &ir->buf_in[i - 1]);
> --------------------------------------------------------------------------------------------------------------------------
>
> The first report crashes at a shift operation(1<<*hi) in mceusb_handle_command.
> --------------------------------------------------------------------------------------------------------------------------
> static void mceusb_handle_command(struct mceusb_dev *ir, u8 *buf_in)
> {
> u8 *hi = &buf_in[2]; /* read only when required */
> if (cmd == MCE_CMD_PORT_SYS) {
> switch (subcmd) {
> case MCE_RSP_GETPORTSTATUS:
> if (buf_in[5] == 0)
> ir->txports_cabled |= 1 << *hi;
> --------------------------------------------------------------------------------------------------------------------------
>
> The second report crashes at another shift operation (1U << data[0])
> in mceusb_dev_printdata.
> --------------------------------------------------------------------------------------------------------------------------
> static void mceusb_dev_printdata(struct mceusb_dev *ir, u8 *buf, int buf_len,
> int offset, int len, bool out)
> {
> data = &buf[offset] + 2;
>
> period = DIV_ROUND_CLOSEST((1U << data[0] * 2) *
> (data[1] + 1), 10);
> --------------------------------------------------------------------------------------------------------------------------
>
> >From the analysis, we can know the data[0] and *hi access the same
> memory cell - ``ir->buf_in[i+1]``. So the root cause should be that it
> misses the check of ir->buf_in[i+1].
>
> For the patch of this bug, there is one from anant.thazhemadam@gmail.com:
> --------------------------------------------------------------------------------------------------------------------------
> diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
> index f1dbd059ed08..79de721b1c4a 100644
> --- a/drivers/media/rc/mceusb.c
> +++ b/drivers/media/rc/mceusb.c
> @@ -1169,7 +1169,7 @@ static void mceusb_handle_command(struct
> mceusb_dev *ir, u8 *buf_in)
> switch (subcmd) {
> /* the one and only 5-byte return value command */
> case MCE_RSP_GETPORTSTATUS:
> - if (buf_in[5] == 0)
> + if ((buf_in[5] == 0) && (*hi <= 32))

This should be < instead of <=. Shifting by 32 is undefined. Also this
patch can't be applied at all so it's hard to review. Read the two
paragraphs of Documentation/process/email-clients.rst

There are some other bugs:

ir->num_txports = *hi;

If "ir->num_txports" is over 31 then it will lead to undefined behavior
in mceusb_set_tx_mask(). It not totally clear to me what the correct
limit is. So search through the code a bit more I guess and try find
the remaining bugs and what the limits should be.

regards,
dan carpenter


\
 
 \ /
  Last update: 2021-01-13 11:04    [W:0.082 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site