lkml.org 
[lkml]   [2021]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 5/5] ARM: dts: meson: add the AO ARC remote processor
From
Date
On 02/01/2021 21:59, Martin Blumenstingl wrote:
> The 32-bit Amlogic Meson SoCs embed an ARC processor in the Always-On
> power domain which is typically used for managing system suspend. The
> memory for this ARC core is taken from the AHB SRAM area. Depending on
> the actual SoC a different ARC core is used:
> - Meson6 and earlier: some ARCv1 ISA based core (probably an ARC625)
> - Meson8 and later: an ARC EM4 (ARCv2 ISA) based core
>
> Add the device-tree node for this remote-processor along with the
> required SRAM sections, clocks and reset-lines. Also use the
> SoC-specific compatible string to manage any differences (should
> they exist).
>
> On Meson8, Meson8b and Meson8m2 the "secbus2" IO region is needed as
> some bits need to be programmed there. Add this IO region for those
> SoCs as well.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> arch/arm/boot/dts/meson.dtsi | 7 +++++++
> arch/arm/boot/dts/meson8.dtsi | 21 +++++++++++++++++++++
> arch/arm/boot/dts/meson8b.dtsi | 21 +++++++++++++++++++++
> 3 files changed, 49 insertions(+)
>
> diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
> index e0ca5f08d07d..8bae6ed0abb2 100644
> --- a/arch/arm/boot/dts/meson.dtsi
> +++ b/arch/arm/boot/dts/meson.dtsi
> @@ -200,6 +200,13 @@ aobus: aobus@c8100000 {
> #size-cells = <1>;
> ranges = <0x0 0xc8100000 0x100000>;
>
> + ao_arc_rproc: remoteproc@1c {
> + compatible= "amlogic,meson-mx-ao-arc";
> + reg = <0x1c 0x8>, <0x38 0x8>;
> + reg-names = "remap", "cpu";
> + status = "disabled";
> + };
> +
> ir_receiver: ir-receiver@480 {
> compatible= "amlogic,meson6-ir";
> reg = <0x480 0x20>;
> diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
> index 420324ea2ad7..157a950a55d3 100644
> --- a/arch/arm/boot/dts/meson8.dtsi
> +++ b/arch/arm/boot/dts/meson8.dtsi
> @@ -369,6 +369,14 @@ mux {
> };
> };
>
> +&ao_arc_rproc {
> + compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
> + amlogic,secbus2 = <&secbus2>;
> + sram = <&ao_arc_sram>;
> + resets = <&reset RESET_MEDIA_CPU>;
> + clocks = <&clkc CLKID_AO_MEDIA_CPU>;
> +};
> +
> &cbus {
> reset: reset-controller@4404 {
> compatible = "amlogic,meson8b-reset";
> @@ -496,6 +504,12 @@ mux {
> };
>
> &ahb_sram {
> + ao_arc_sram: ao-arc-sram@0 {
> + compatible = "amlogic,meson8-ao-arc-sram";
> + reg = <0x0 0x8000>;
> + pool;
> + };
> +
> smp-sram@1ff80 {
> compatible = "amlogic,meson8-smp-sram";
> reg = <0x1ff80 0x8>;
> @@ -631,6 +645,13 @@ &sdhc {
> clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
> };
>
> +&secbus {
> + secbus2: system-controller@4000 {
> + compatible = "amlogic,meson8-secbus2", "syscon";
> + reg = <0x4000 0x2000>;
> + };
> +};
> +
> &sdio {
> compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio";
> clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
> diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
> index dbf7963b6c87..c02b03cbcdf4 100644
> --- a/arch/arm/boot/dts/meson8b.dtsi
> +++ b/arch/arm/boot/dts/meson8b.dtsi
> @@ -320,6 +320,14 @@ mux {
> };
> };
>
> +&ao_arc_rproc {
> + compatible= "amlogic,meson8b-ao-arc", "amlogic,meson-mx-ao-arc";
> + amlogic,secbus2 = <&secbus2>;
> + sram = <&ao_arc_sram>;
> + resets = <&reset RESET_MEDIA_CPU>;
> + clocks = <&clkc CLKID_AO_MEDIA_CPU>;
> +};
> +
> &cbus {
> reset: reset-controller@4404 {
> compatible = "amlogic,meson8b-reset";
> @@ -464,6 +472,12 @@ mux {
> };
>
> &ahb_sram {
> + ao_arc_sram: ao-arc-sram@0 {
> + compatible = "amlogic,meson8b-ao-arc-sram";
> + reg = <0x0 0x8000>;
> + pool;
> + };
> +
> smp-sram@1ff80 {
> compatible = "amlogic,meson8b-smp-sram";
> reg = <0x1ff80 0x8>;
> @@ -628,6 +642,13 @@ &sdhc {
> clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
> };
>
> +&secbus {
> + secbus2: system-controller@4000 {
> + compatible = "amlogic,meson8b-secbus2", "syscon";
> + reg = <0x4000 0x2000>;
> + };
> +};
> +
> &sdio {
> compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio";
> clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
>

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>

\
 
 \ /
  Last update: 2021-01-12 15:49    [W:0.103 / U:1.988 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site