Messages in this thread | | | Subject | Re: [PATCH v1 0/2] Add 100 base-x mode | From | Bjarni Jonasson <> | Date | Tue, 12 Jan 2021 15:33:34 +0100 |
| |
On Mon, 2021-01-11 at 14:18 +0000, Russell King - ARM Linux admin wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you > know the content is safe > > On Mon, Jan 11, 2021 at 02:06:55PM +0100, Bjarni Jonasson wrote: > > Adding support for 100 base-x in phylink. > > The Sparx5 switch supports 100 base-x pcs (IEEE 802.3 Clause 24) > > 4b5b encoded. > > These patches adds phylink support for that mode. > > > > Tested in Sparx5, using sfp modules: > > Axcen 100fx AXFE-1314-0521 > > Cisco GLC-FE-100LX > > HP SFP 100FX J9054C > > Excom SFP-SX-M1002 > > For each of these modules, please send me: > > ethtool -m ethx raw on > module.bin > > so I can validate future changes with these modules. Thanks. > > -- > RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ > FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
I've included the dump from ethtool for: Axcen 100fx AXFE-1314-0521 Axcen 100lx AXFE-1314-0551 Excom SFP-SX-M1002 HP SFP 100FX J9054C The "ethtool raw" output seems a bit garbled so I added the hex output as well.
Rgds -- Bjarni Jonasson Microchip
[unhandled content-type:application/octet-stream][unhandled content-type:application/octet-stream][unhandled content-type:application/octet-stream][unhandled content-type:application/octet-stream] | |