Messages in this thread Patch in this message | | | From | Andreas Kemnade <> | Subject | [PATCH 3/4] ARM: dts: imx6sl-tolino-shine3: correct console uart pinmux | Date | Wed, 13 Jan 2021 00:15:48 +0100 |
| |
Configuration was correct enough to work with the pre-configuration done by uboot. While at it, also document the location.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info> --- arch/arm/boot/dts/imx6sl-tolino-shine3.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts index 27143ea0f0f1..62d2ebda04ff 100644 --- a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts +++ b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts @@ -156,7 +156,7 @@ pinctrl_uart1: uart1grp { fsl,pins = < MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 - MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x1b0b1 + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 >; }; -- 2.20.1
| |