lkml.org 
[lkml]   [2021]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/5] ARM: dts: meson: add the ADC thermal sensor to meson.dtsi
From
Date
On 21/12/2020 19:13, Martin Blumenstingl wrote:
> The SoC temperature can be retrieved from ADC channel 8 on all 32-bit
> SoCs (Meson6, Meson8, Meson8b and Meson8m2). Add a "generic-adc-thermal"
> instance to meson.dtsi so the thermal sensor is available for all SoCs.
> If the temperature sensor calibration data is missing for a board then
> the "generic-adc-thermal" will not probe and not register a thermal
> sensor.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> arch/arm/boot/dts/meson.dtsi | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
> index 5f074f7aa1a2..e0ca5f08d07d 100644
> --- a/arch/arm/boot/dts/meson.dtsi
> +++ b/arch/arm/boot/dts/meson.dtsi
> @@ -298,6 +298,13 @@ efuse: nvmem@0 {
> };
> };
>
> + thermal_sensor: thermal-sensor {
> + compatible = "generic-adc-thermal";
> + #thermal-sensor-cells = <0>;
> + io-channels = <&saradc 8>;
> + io-channel-names = "sensor-channel";
> + };
> +
> xtal: xtal-clk {
> compatible = "fixed-clock";
> clock-frequency = <24000000>;
>

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>

\
 
 \ /
  Last update: 2021-01-11 15:05    [W:0.067 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site