lkml.org 
[lkml]   [2020]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/4] drivers/perf: Add support for ARMv8.3-SPE
On Fri, Jul 24, 2020 at 05:16:04PM +0800, Wei Li wrote:
> Armv8.3 extends the SPE by adding:
> - Alignment field in the Events packet, and filtering on this event
> using PMSEVFR_EL1.
> - Support for the Scalable Vector Extension (SVE).
>
> The main additions for SVE are:
> - Recording the vector length for SVE operations in the Operation Type
> packet. It is not possible to filter on vector length.
> - Incomplete predicate and empty predicate fields in the Events packet,
> and filtering on these events using PMSEVFR_EL1.
>
> Update the check of pmsevfr for empty/partial predicated SVE and
> alignment event in kernel driver.
>
> Signed-off-by: Wei Li <liwei391@huawei.com>
> ---
> arch/arm64/include/asm/sysreg.h | 4 +++-
> drivers/perf/arm_spe_pmu.c | 18 ++++++++++++++----
> 2 files changed, 17 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
> index 463175f80341..be4c44ccdb56 100644
> --- a/arch/arm64/include/asm/sysreg.h
> +++ b/arch/arm64/include/asm/sysreg.h
> @@ -281,7 +281,6 @@
> #define SYS_PMSFCR_EL1_ST_SHIFT 18
>
> #define SYS_PMSEVFR_EL1 sys_reg(3, 0, 9, 9, 5)
> -#define SYS_PMSEVFR_EL1_RES0 0x0000ffff00ff0f55UL

I think we can just update this mask unconditionally to allow the new bits.

> #define SYS_PMSLATFR_EL1 sys_reg(3, 0, 9, 9, 6)
> #define SYS_PMSLATFR_EL1_MINLAT_SHIFT 0
> @@ -769,6 +768,9 @@
> #define ID_AA64DFR0_PMUVER_8_5 0x6
> #define ID_AA64DFR0_PMUVER_IMP_DEF 0xf
>
> +#define ID_AA64DFR0_PMSVER_8_2 0x1
> +#define ID_AA64DFR0_PMSVER_8_3 0x2
> +
> #define ID_DFR0_PERFMON_SHIFT 24
>
> #define ID_DFR0_PERFMON_8_1 0x4
> diff --git a/drivers/perf/arm_spe_pmu.c b/drivers/perf/arm_spe_pmu.c
> index e51ddb6d63ed..5ec7ee0c8fa1 100644
> --- a/drivers/perf/arm_spe_pmu.c
> +++ b/drivers/perf/arm_spe_pmu.c
> @@ -54,7 +54,7 @@ struct arm_spe_pmu {
> struct hlist_node hotplug_node;
>
> int irq; /* PPI */
> -
> + int pmuver;

nit: please call this "pmsver" to align with the architecture (where
"pmuver" means something else).

> u16 min_period;
> u16 counter_sz;
>
> @@ -80,6 +80,15 @@ struct arm_spe_pmu {
> /* Keep track of our dynamic hotplug state */
> static enum cpuhp_state arm_spe_pmu_online;
>
> +static u64 sys_pmsevfr_el1_mask[] = {
> + [ID_AA64DFR0_PMSVER_8_2] = GENMASK_ULL(63, 48) | GENMASK_ULL(31, 24) |
> + GENMASK_ULL(15, 12) | BIT_ULL(7) | BIT_ULL(5) | BIT_ULL(3) |
> + BIT_ULL(1),
> + [ID_AA64DFR0_PMSVER_8_3] = GENMASK_ULL(63, 48) | GENMASK_ULL(31, 24) |
> + GENMASK_ULL(18, 17) | GENMASK_ULL(15, 11) | BIT_ULL(7) |
> + BIT_ULL(5) | BIT_ULL(3) | BIT_ULL(1),
> +};

As I said above, you can drop this and just update the #define.

> +
> enum arm_spe_pmu_buf_fault_action {
> SPE_PMU_BUF_FAULT_ACT_SPURIOUS,
> SPE_PMU_BUF_FAULT_ACT_FATAL,
> @@ -670,7 +679,7 @@ static int arm_spe_pmu_event_init(struct perf_event *event)
> !cpumask_test_cpu(event->cpu, &spe_pmu->supported_cpus))
> return -ENOENT;
>
> - if (arm_spe_event_to_pmsevfr(event) & SYS_PMSEVFR_EL1_RES0)
> + if (arm_spe_event_to_pmsevfr(event) & ~sys_pmsevfr_el1_mask[spe_pmu->pmuver])
> return -EOPNOTSUPP;

Same here.

>
> if (attr->exclude_idle)
> @@ -937,6 +946,7 @@ static void __arm_spe_pmu_dev_probe(void *info)
> fld, smp_processor_id());
> return;
> }
> + spe_pmu->pmuver = fld;
>
> /* Read PMBIDR first to determine whether or not we have access */
> reg = read_sysreg_s(SYS_PMBIDR_EL1);
> @@ -1027,8 +1037,8 @@ static void __arm_spe_pmu_dev_probe(void *info)
> }
>
> dev_info(dev,
> - "probed for CPUs %*pbl [max_record_sz %u, align %u, features 0x%llx]\n",
> - cpumask_pr_args(&spe_pmu->supported_cpus),
> + "v%d probed for CPUs %*pbl [max_record_sz %u, align %u, features 0x%llx]\n",
> + spe_pmu->pmuver, cpumask_pr_args(&spe_pmu->supported_cpus),

There's no need for this. If userspace finds this information useful, then
we should expose it in sysfs, like we do for other PMU paramaters. If
userspace doesn't find it useful, then there's no need to expose it at all.

So I would suggest adding something like SPE_PMU_CAP_PMSVER and exposing the
field on a per-SPE-PMU basis in sysfs.

big.LITTLE should work as before, where we expose a completely separate PMU
instance for each CPU type.

Will
>

\
 
 \ /
  Last update: 2020-09-07 15:02    [W:0.133 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site