lkml.org 
[lkml]   [2020]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] drm/bridge/synopsys: dsi: allow sending longer LP commands
From
Date
On 01/07/2020 16:31, Yannick Fertre wrote:
> From: Antonio Borneo <antonio.borneo@st.com>
>
> Current code does not properly computes the max length of LP
> commands that can be send during H or V sync, and rely on static
> values.
> Limiting the max LP length to 4 byte during the V-sync is overly
> conservative.
>
> Relax the limit and allows longer LP commands (16 bytes) to be
> sent during V-sync.
>
> Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
> ---
> drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 17 +++++++++--------
> 1 file changed, 9 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> index d580b2aa4ce9..1a24ea648ef8 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> @@ -360,6 +360,15 @@ static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
> bool lpm = msg->flags & MIPI_DSI_MSG_USE_LPM;
> u32 val = 0;
>
> + /*
> + * TODO dw drv improvements
> + * largest packet sizes during hfp or during vsa/vpb/vfp
> + * should be computed according to byte lane, lane number and only
> + * if sending lp cmds in high speed is enable (PHY_TXREQUESTCLKHS)
> + */
> + dsi_write(dsi, DSI_DPI_LP_CMD_TIM, OUTVACT_LPCMD_TIME(16)
> + | INVACT_LPCMD_TIME(4));
> +
> if (msg->flags & MIPI_DSI_MSG_REQ_ACK)
> val |= ACK_RQST_EN;
> if (lpm)
> @@ -611,14 +620,6 @@ static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
> dsi_write(dsi, DSI_DPI_VCID, DPI_VCID(dsi->channel));
> dsi_write(dsi, DSI_DPI_COLOR_CODING, color);
> dsi_write(dsi, DSI_DPI_CFG_POL, val);
> - /*
> - * TODO dw drv improvements
> - * largest packet sizes during hfp or during vsa/vpb/vfp
> - * should be computed according to byte lane, lane number and only
> - * if sending lp cmds in high speed is enable (PHY_TXREQUESTCLKHS)
> - */
> - dsi_write(dsi, DSI_DPI_LP_CMD_TIM, OUTVACT_LPCMD_TIME(4)
> - | INVACT_LPCMD_TIME(4));
> }
>
> static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi)
>


Tested on Amlogic AXG (v1.21a)

Acked-by: Neil Armstrong <narmstrong@baylibre.com>

Applying to drm-misc-next

Thanks !
Neil

\
 
 \ /
  Last update: 2020-09-07 10:03    [W:2.404 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site