lkml.org 
[lkml]   [2020]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH net-next 0/2] net: two updates related to UDP GSO
From
Date


On 2020/9/7 23:35, Willem de Bruijn wrote:
> On Mon, Sep 7, 2020 at 3:38 PM tanhuazhong <tanhuazhong@huawei.com> wrote:
>>
>>
>>
>> On 2020/9/7 17:22, Willem de Bruijn wrote:
>>> On Sun, Sep 6, 2020 at 8:42 PM Jakub Kicinski <kuba@kernel.org> wrote:
>>>>
>>>> On Sat, 5 Sep 2020 14:11:11 +0800 Huazhong Tan wrote:
>>>>> There are two updates relates to UDP GSO.
>>>>> #1 adds a new GSO type for UDPv6
>>>>> #2 adds check for UDP GSO when csum is disable in netdev_fix_features().
>>>>>
>>>>> Changes since RFC V2:
>>>>> - modifies the timing of setting UDP GSO type when doing UDP GRO in #1.
>>>>>
>>>>> Changes since RFC V1:
>>>>> - updates NETIF_F_GSO_LAST suggested by Willem de Bruijn.
>>>>> and add NETIF_F_GSO_UDPV6_L4 feature for each driver who support UDP GSO in #1.
>>>>> - add #2 who needs #1.
>>>>
>>>> Please CC people who gave you feedback (Willem).
>>>>
>>>> I don't feel good about this series. IPv6 is not optional any more.
>>>> AFAIU you have some issues with csum support in your device? Can you
>>>> use .ndo_features_check() to handle this?
>>>>
>>>> The change in semantics of NETIF_F_GSO_UDP_L4 from "v4 and v6" to
>>>> "just v4" can trip people over; this is not a new feature people
>>>> may be depending on the current semantics.
>>>>
>>>> Willem, what are your thoughts on this?
>>>
>>> If that is the only reason, +1 on fixing it up in the driver's
>>> ndo_features_check.
>>>
>>
>> Hi, Willem & Jakub.
>>
>> This series mainly fixes the feature dependency between hardware
>> checksum and UDP GSO.
>> When turn off hardware checksum offload, run 'ethtool -k [devname]'
>> we can see TSO is off as well, but udp gso still is on.
>
> I see. That does not entirely require separate IPv4 and IPv6 flags. It
> can be disabled if either checksum offload is disabled. I'm not aware
> of any hardware that only supports checksum offload for one of the two
> network protocols.
>

below patch is acceptable? i have sent this patch before
(https://patchwork.ozlabs.org/project/netdev/patch/1594180136-15912-3-git-send-email-tanhuazhong@huawei.com/)

diff --git a/net/core/dev.c b/net/core/dev.c
index c02bae9..dcb6b35 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -9095,6 +9095,12 @@ static netdev_features_t
netdev_fix_features(struct net_device *dev,
features &= ~NETIF_F_TSO6;
}

+ if ((features & NETIF_F_GSO_UDP_L4) && !(features & NETIF_F_HW_CSUM) &&
+ (!(features & NETIF_F_IP_CSUM) || !(features & NETIF_F_IPV6_CSUM))) {
+ netdev_dbg(dev, "Dropping UDP GSO features since no CSUM feature.\n");
+ features &= ~NETIF_F_GSO_UDP_L4;
+ }
+
/* TSO with IPv4 ID mangling requires IPv4 TSO be enabled */
if ((features & NETIF_F_TSO_MANGLEID) && !(features & NETIF_F_TSO))
features &= ~NETIF_F_TSO_MANGLEID;
As Eric Dumazet commented "This would prevent a device providing IPv4
checksum only (no IPv6 csum support) from sending IPv4 UDP GSO packets ?",
so i send this series to decouple them. Is there any good ways to
shuttle this issue? Or as you said there is not device only support
checksum offload for one of the two network protocols.

> Alternatively, the real value of splitting the type is in advertising
> the features separately through ethtool. That requires additional
> changes.
>


> .
>

\
 
 \ /
  Last update: 2020-09-08 04:33    [W:0.069 / U:1.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site