lkml.org 
[lkml]   [2020]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/5] Documentation: dt: binding: fsl: Add 'fsl,ippdexpcr1-alt-addr' property
On Wed, Sep 23, 2020 at 1:44 AM Ran Wang <ran.wang_1@nxp.com> wrote:
>
> Hi Rob,
>
> On Wednesday, September 23, 2020 10:33 AM, Rob Herring wrote:
> >
> > On Wed, Sep 16, 2020 at 04:18:27PM +0800, Ran Wang wrote:
> > > From: Biwen Li <biwen.li@nxp.com>
> > >
> > > The 'fsl,ippdexpcr1-alt-addr' property is used to handle an errata
> > > A-008646 on LS1021A
> > >
> > > Signed-off-by: Biwen Li <biwen.li@nxp.com>
> > > Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
> > > ---
> > > Documentation/devicetree/bindings/soc/fsl/rcpm.txt | 19
> > > +++++++++++++++++++
> > > 1 file changed, 19 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> > > b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> > > index 5a33619..1be58a3 100644
> > > --- a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> > > +++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> > > @@ -34,6 +34,11 @@ Chassis Version Example Chips
> > > Optional properties:
> > > - little-endian : RCPM register block is Little Endian. Without it RCPM
> > > will be Big Endian (default case).
> > > + - fsl,ippdexpcr1-alt-addr : The property is related to a hardware issue
> > > + on SoC LS1021A and only needed on SoC LS1021A.
> > > + Must include 2 entries:
> > > + The first entry must be a link to the SCFG device node.
> > > + The 2nd entry must be offset of register IPPDEXPCR1 in SCFG.
> >
> > You don't need a DT change for this. You can find SCFG node by its compatible
> > string and then the offset should be known given this issue is only on 1 SoC.
>
> Did you mean that RCPM driver just to access IPPDEXPCR1 shadowed register in SCFG
> directly without fetching it's offset info. from DT?

Yes. There's only 1 possible value of the offset because there's only
one SoC, so the driver can hardcode the offset. And I assume there's
only one SCFG node, so you can find it by its compatible string
(of_find_compatible_node).

Rob

\
 
 \ /
  Last update: 2020-09-28 15:57    [W:0.061 / U:0.820 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site