lkml.org 
[lkml]   [2020]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/8] dma-mapping: add DMA_ATTR_LOW_ADDRESS attribute
Date
Some devices require to allocate a special buffer (usually for the
firmware) just at the beginning of the address space to ensure that all
further allocations can be expressed as a positive offset from that
special buffer. When IOMMU is used for managing the DMA address space,
such requirement can be easily fulfilled, simply by enforcing the
'first-fit' IOVA allocation algorithm.

This patch adds a DMA attribute for such case.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
include/linux/dma-mapping.h | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index bb138ac6f5e6..c8c568ba375b 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -66,6 +66,12 @@
* at least read-only at lesser-privileged levels).
*/
#define DMA_ATTR_PRIVILEGED (1UL << 9)
+/*
+ * DMA_ATTR_LOW_ADDRESS: used to indicate that the buffer should be allocated
+ * at the lowest possible DMA address, usually just at the beginning of the
+ * DMA/IOVA address space ('first-fit' allocation algorithm).
+ */
+#define DMA_ATTR_LOW_ADDRESS (1UL << 10)

/*
* A dma_addr_t can hold any valid DMA or bus address for the platform.
--
2.17.1
\
 
 \ /
  Last update: 2020-09-25 16:12    [W:0.066 / U:0.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site