lkml.org 
[lkml]   [2020]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] e1000e: Increase iteration on polling MDIC ready bit
Date
We are seeing the following error after S3 resume:
[ 704.746874] e1000e 0000:00:1f.6 eno1: Setting page 0x6020
[ 704.844232] e1000e 0000:00:1f.6 eno1: MDI Write did not complete
[ 704.902817] e1000e 0000:00:1f.6 eno1: Setting page 0x6020
[ 704.903075] e1000e 0000:00:1f.6 eno1: reading PHY page 769 (or 0x6020 shifted) reg 0x17
[ 704.903281] e1000e 0000:00:1f.6 eno1: Setting page 0x6020
[ 704.903486] e1000e 0000:00:1f.6 eno1: writing PHY page 769 (or 0x6020 shifted) reg 0x17
[ 704.943155] e1000e 0000:00:1f.6 eno1: MDI Error
...
[ 705.108161] e1000e 0000:00:1f.6 eno1: Hardware Error

As Andrew Lunn pointed out, MDIO has nothing to do with phy, and indeed
increase polling iteration can resolve the issue.

While at it, also move the delay to the end of loop, to potentially save
50 us.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
v2:
- Increase polling iteration instead of powering down the phy.

drivers/net/ethernet/intel/e1000e/phy.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index e11c877595fb..72968a01164b 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -203,11 +203,12 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
* Increasing the time out as testing showed failures with
* the lower time out
*/
- for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
- udelay(50);
+ for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 10); i++) {
mdic = er32(MDIC);
if (mdic & E1000_MDIC_READY)
break;
+
+ udelay(50);
}
if (!(mdic & E1000_MDIC_READY)) {
e_dbg("MDI Write did not complete\n");
--
2.17.1
\
 
 \ /
  Last update: 2020-09-24 17:11    [W:0.155 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site