lkml.org 
[lkml]   [2020]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] ARM: dts: document pinctrl-single,pins when #pinctrl-cells = 2
On Wed, Sep 23, 2020 at 11:06 PM Tony Lindgren <tony@atomide.com> wrote:
>
> * Trent Piepho <tpiepho@gmail.com> [200924 05:49]:
> > On Wed, Sep 23, 2020 at 10:43 PM Tony Lindgren <tony@atomide.com> wrote:
> > >
> > > * Trent Piepho <tpiepho@gmail.com> [200924 01:34]:
> > > > On Tue, Sep 22, 2020 at 11:57 PM Tony Lindgren <tony@atomide.com> wrote:
> > > > >
> > > > > Also FYI, folks have also complained for a long time that the pinctrl-single
> > > > > binding mixes mux and conf values while they should be handled separately.
> > > > >
> > > >
> > > > Instead of combining two fields when the dts is generated they are now
> > > > combined when the pinctrl-single driver reads the dts. Other than
> > > > this detail, the result is the same. The board dts source is the
> > > > same. The value programmed into the pinctrl register is the same.
> > > > There is no mechanism currently that can alter that value in any way.
> > > >
> > > > What does combining them later allow that is not possible now?
> > >
> > > It now allows further driver changes to manage conf and mux separately :)
> >
> > The pinctrl-single driver? How will that work with boards that are
> > not am335x and don't use conf and mux fields in the same manner as
> > am335x?
>
> For those cases we still have #pinctrl-cells = <1>.

If pincntrl-single is going to be am335x specific, then shouldn't it
be a different compatible string?

Are the driver changes something that can be not be done with the
pinconf-single properties? They all include a mask.

\
 
 \ /
  Last update: 2020-09-24 08:32    [W:0.103 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site