lkml.org 
[lkml]   [2020]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] [RFC] rtc: pcf2127: only use watchdog when explicitly available
Date
Most boards using the pcf2127 chip (in my bubble) don't make use of the
watchdog functionality and the respective output is not connected. The
effect on such a board is that there is a watchdog device provided that
doesn't work.

So only register the watchdog if the device tree has a "has-watchdog"
property.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
drivers/rtc/rtc-pcf2127.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
index 5b1f1949b5e5..8bd89d641578 100644
--- a/drivers/rtc/rtc-pcf2127.c
+++ b/drivers/rtc/rtc-pcf2127.c
@@ -340,7 +340,8 @@ static int pcf2127_watchdog_init(struct device *dev, struct pcf2127 *pcf2127)
u32 wdd_timeout;
int ret;

- if (!IS_ENABLED(CONFIG_WATCHDOG))
+ if (!IS_ENABLED(CONFIG_WATCHDOG) ||
+ !device_property_read_bool(dev, "has-watchdog"))
return 0;

pcf2127->wdd.parent = dev;
--
2.28.0
\
 
 \ /
  Last update: 2020-09-24 12:53    [W:0.152 / U:0.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site