Messages in this thread | | | From | Vladimir Oltean <> | Subject | Re: [net-next] net: dsa: felix: convert TAS link speed based on phylink speed | Date | Tue, 22 Sep 2020 11:36:45 +0000 |
| |
Hi Xiaoliang,
On Tue, Sep 22, 2020 at 06:43:02PM +0800, Xiaoliang Yang wrote: > state->speed holds a value of 10, 100, 1000 or 2500, but > QSYS_TAG_CONFIG_LINK_SPEED expects a value of 0, 1, 2, 3. So convert the > speed to a proper value. > > Fixes: de143c0e274b ("net: dsa: felix: Configure Time-Aware Scheduler via > taprio offload") > > Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> > ---
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
But next time keep in mind the following:
- The Fixes: tag should never wrap on multiple lines, even if it exceeds 80 characters. - Patches that fix a problem in net-next only should go to David's net-next tree. Patches that fix a problem on Linus Torvalds' tree should go to David's "net" tree. This one should go to "net", not to "net-next". - All tags (Fixes, Signed-off-by, etc) should be grouped together with no empty lines between them.
Actually due to the first issue I mentioned, could you please resend this?
Thanks, -Vladimir
| |