lkml.org 
[lkml]   [2020]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v9 1/5] PCI: Conditionally initialize host bridge native_* members
I got 1/5, 3/5, and 5/5 (and no cover letter).  Is there a 2/5 and a
4/5? Not sure if I should wait for more, or review these three as-is?

On Fri, Sep 18, 2020 at 12:58:30PM -0700, sathyanarayanan.kuppuswamy@linux.intel.com wrote:
> From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
>
> If CONFIG_PCIEPORTBUS is not enabled in kernel then initialing
> struct pci_host_bridge PCIe specific native_* members to "1" is
> incorrect. So protect the PCIe specific member initialization
> with CONFIG_PCIEPORTBUS.
>
> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> ---
> drivers/pci/probe.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index 03d37128a24f..0da0fc034413 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -588,12 +588,14 @@ static void pci_init_host_bridge(struct pci_host_bridge *bridge)
> * may implement its own AER handling and use _OSC to prevent the
> * OS from interfering.
> */
> +#ifdef CONFIG_PCIEPORTBUS
> bridge->native_aer = 1;
> bridge->native_pcie_hotplug = 1;
> - bridge->native_shpc_hotplug = 1;
> bridge->native_pme = 1;
> - bridge->native_ltr = 1;
> bridge->native_dpc = 1;
> +#endif
> + bridge->native_ltr = 1;
> + bridge->native_shpc_hotplug = 1;
>
> device_initialize(&bridge->dev);
> }
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2020-09-22 22:40    [W:0.073 / U:1.812 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site