lkml.org 
[lkml]   [2020]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: R: [PATCH v2 4/4] dt-bindings: net: Document use of mac-address-increment
Date
> On Sun, Sep 20, 2020 at 02:39:39AM +0200, ansuelsmth@gmail.com
> wrote:
> >
> >
> > > -----Messaggio originale-----
> > > Da: Andrew Lunn <andrew@lunn.ch>
> > > Inviato: domenica 20 settembre 2020 02:31
> > > A: Ansuel Smith <ansuelsmth@gmail.com>
> > > Cc: Miquel Raynal <miquel.raynal@bootlin.com>; Richard Weinberger
> > > <richard@nod.at>; Vignesh Raghavendra <vigneshr@ti.com>; Rob
> Herring
> > > <robh+dt@kernel.org>; David S. Miller <davem@davemloft.net>; Jakub
> > > Kicinski <kuba@kernel.org>; Heiner Kallweit <hkallweit1@gmail.com>;
> > > Russell King <linux@armlinux.org.uk>; Frank Rowand
> > > <frowand.list@gmail.com>; Boris Brezillon <bbrezillon@kernel.org>;
> linux-
> > > mtd@lists.infradead.org; devicetree@vger.kernel.org; linux-
> > > kernel@vger.kernel.org; netdev@vger.kernel.org
> > > Oggetto: Re: [PATCH v2 4/4] dt-bindings: net: Document use of mac-
> > > address-increment
> > >
> > > > + mac-address-increment:
> > > > + description:
> > > > + The MAC address can optionally be increased (or decreased
using
> > > > + negative values) from the original value readed (from a nvmem
> > cell
> > >
> > > Read is irregular, there is no readed, just read.
> > >
> > > > + for example). This can be used if the mac is readed from a
> > dedicated
> > > > + partition and must be increased based on the number of device
> > > > + present in the system.
> > >
> > > You should probably add there is no underflow/overflow to other bytes
> > > of the MAC address. 00:01:02:03:04:ff + 1 == 00:01:02:03:04:00.
> > >
> > > > + minimum: -255
> > > > + maximum: 255
> > > > +
> > > > + mac-address-increment-byte:
> > > > + description:
> > > > + If 'mac-address-increment' is defined, this will tell what
byte
> > of
> > > > + the mac-address will be increased. If 'mac-address-increment'
is
> > > > + not defined, this option will do nothing.
> > > > + default: 5
> > > > + minimum: 0
> > > > + maximum: 5
> > >
> > > Is there a real need for this? A value of 0 seems like a bad idea,
> > > since a unicast address could easily become a multicast address, which
> > > is not valid for an interface address. It also does not seem like a
> > > good idea to allow the OUI to be changed. So i think only bytes 3-5
> > > should be allowed, but even then, i don't think this is needed, unless
> > > you do have a clear use case.
> > >
> > > Andrew
> >
> > Honestly the mac-address-increment-byte is added to give user some
> control
> > but I
> > don't really have a use case for it. Should I limit it to 3 or just
remove
> > the function?
>
> If you have no use case, just remove it and document that last byte
> will be incremented. I somebody does need it, it can be added in a
> backwards compatible way.
>
> Andrew

I just rechecked mac-address-increment-byte and we have one device that
use it and would benefits from this. I will change the Documentation to
min 3 and leave it.

\
 
 \ /
  Last update: 2020-09-20 11:46    [W:0.035 / U:1.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site