lkml.org 
[lkml]   [2020]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 6/7] arm64: dts: ti: k3-*: Use generic adc for node names
From
Date
On 9/1/20 5:30 PM, Nishanth Menon wrote:
> Use adc@ naming for nodes following standard conventions of device
> tree (section 2.2.2 Generic Names recommendation in [1]).
>
> [1] https://github.com/devicetree-org/devicetree-specification/tree/v0.3
>
> Suggested-by: Suman Anna <s-anna@ti.com>
> Signed-off-by: Nishanth Menon <nm@ti.com>
> ---
> arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 4 ++--
> arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 4 ++--
> 2 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
> index 51ca4b4d4c21..6dfec68ac865 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
> @@ -80,7 +80,7 @@
> #size-cells = <0>;
> };
>
> - tscadc0: tscadc@40200000 {
> + tscadc0: adc@40200000 {

OK with these changes, since these seem to be only have the adc child nodes.
This node is essentially a parent node for touchscreen and adc child nodes. The
driver is currently looking for "tsc" on touchscreen child nodes, but none of
the K3 SoCs have them atm.

regards
Suman

> compatible = "ti,am654-tscadc", "ti,am3359-tscadc";
> reg = <0x0 0x40200000 0x0 0x1000>;
> interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
> @@ -98,7 +98,7 @@
> };
> };
>
> - tscadc1: tscadc@40210000 {
> + tscadc1: adc@40210000 {
> compatible = "ti,am654-tscadc", "ti,am3359-tscadc";
> reg = <0x0 0x40210000 0x0 0x1000>;
> interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> index 9ad0266598ad..81801f519a61 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> @@ -211,7 +211,7 @@
> };
> };
>
> - tscadc0: tscadc@40200000 {
> + tscadc0: adc@40200000 {
> compatible = "ti,am3359-tscadc";
> reg = <0x0 0x40200000 0x0 0x1000>;
> interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
> @@ -230,7 +230,7 @@
> };
> };
>
> - tscadc1: tscadc@40210000 {
> + tscadc1: adc@40210000 {
> compatible = "ti,am3359-tscadc";
> reg = <0x0 0x40210000 0x0 0x1000>;
> interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>;
>

\
 
 \ /
  Last update: 2020-09-02 18:52    [W:0.254 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site