Messages in this thread | | | Subject | Re: [RFC v2 2/2] KVM: VMX: Enable bus lock VM exit | From | Chenyi Qiang <> | Date | Wed, 2 Sep 2020 13:19:32 +0800 |
| |
On 9/1/2020 4:43 PM, Vitaly Kuznetsov wrote: > Chenyi Qiang <chenyi.qiang@intel.com> writes: > >> Virtual Machine can exploit bus locks to degrade the performance of >> system. Bus lock can be caused by split locked access to writeback(WB) >> memory or by using locks on uncacheable(UC) memory. The bus lock is >> typically >1000 cycles slower than an atomic operation within a cache >> line. It also disrupts performance on other cores (which must wait for >> the bus lock to be released before their memory operations can >> complete). >> >> To address the threat, bus lock VM exit is introduced to notify the VMM >> when a bus lock was acquired, allowing it to enforce throttling or other >> policy based mitigations. >> >> A VMM can enable VM exit due to bus locks by setting a new "Bus Lock >> Detection" VM-execution control(bit 30 of Secondary Processor-based VM >> execution controls). If delivery of this VM exit was preempted by a >> higher priority VM exit (e.g. EPT misconfiguration, EPT violation, APIC >> access VM exit, APIC write VM exit, exception bitmap exiting), bit 26 of >> exit reason in vmcs field is set to 1. >> >> In current implementation, the KVM exposes this capability through >> KVM_CAP_X86_BLD. The user can set it to enable the bus lock VM exit >> (disabled by default). If bus locks in guest are detected by KVM, exit >> to user space even when current exit reason is handled by KVM >> internally. Set a new field KVM_RUN_BUS_LOCK in vcpu->run->flags to >> inform the user space that there is a bus lock in guest and it is >> preempted by a higher priority VM exit. >> >> Every bus lock acquired in non-root mode will be recorded in >> vcpu->stat.bus_locks and exposed through debugfs when the bus lock >> VM exit is enabled. >> >> Document for Bus Lock VM exit is now available at the latest "Intel >> Architecture Instruction Set Extensions Programming Reference". >> >> Document Link: >> https://software.intel.com/content/www/us/en/develop/download/intel-architecture-instruction-set-extensions-programming-reference.html >> >> Co-developed-by: Xiaoyao Li <xiaoyao.li@intel.com> >> Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> >> Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com> >> --- >> arch/x86/include/asm/kvm_host.h | 9 ++++++++ >> arch/x86/include/asm/vmx.h | 1 + >> arch/x86/include/asm/vmxfeatures.h | 1 + >> arch/x86/include/uapi/asm/kvm.h | 1 + >> arch/x86/include/uapi/asm/vmx.h | 4 +++- >> arch/x86/kvm/vmx/capabilities.h | 6 +++++ >> arch/x86/kvm/vmx/vmx.c | 33 ++++++++++++++++++++++++++- >> arch/x86/kvm/vmx/vmx.h | 2 +- >> arch/x86/kvm/x86.c | 36 +++++++++++++++++++++++++++++- >> arch/x86/kvm/x86.h | 5 +++++ >> include/uapi/linux/kvm.h | 2 ++ >> 11 files changed, 96 insertions(+), 4 deletions(-) >> >> diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h >> index be5363b21540..bfabe2f15b30 100644 >> --- a/arch/x86/include/asm/kvm_host.h >> +++ b/arch/x86/include/asm/kvm_host.h >> @@ -829,6 +829,9 @@ struct kvm_vcpu_arch { >> >> /* AMD MSRC001_0015 Hardware Configuration */ >> u64 msr_hwcr; >> + >> + /* Set when bus lock VM exit is preempted by a higher priority VM exit */ >> + bool bus_lock_detected; >> }; >> >> struct kvm_lpage_info { >> @@ -1002,6 +1005,9 @@ struct kvm_arch { >> bool guest_can_read_msr_platform_info; >> bool exception_payload_enabled; >> >> + /* Set when bus lock vm exit is enabled by user */ >> + bool bus_lock_exit; >> + >> struct kvm_pmu_event_filter *pmu_event_filter; >> struct task_struct *nx_lpage_recovery_thread; >> }; >> @@ -1051,6 +1057,7 @@ struct kvm_vcpu_stat { >> u64 req_event; >> u64 halt_poll_success_ns; >> u64 halt_poll_fail_ns; >> + u64 bus_locks; >> }; >> >> struct x86_instruction_info; >> @@ -1388,6 +1395,8 @@ extern u8 kvm_tsc_scaling_ratio_frac_bits; >> extern u64 kvm_max_tsc_scaling_ratio; >> /* 1ull << kvm_tsc_scaling_ratio_frac_bits */ >> extern u64 kvm_default_tsc_scaling_ratio; >> +/* bus lock detection supported */ >> +extern bool kvm_has_bus_lock_exit; >> >> extern u64 kvm_mce_cap_supported; >> >> diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h >> index cd7de4b401fe..93a880bc31a7 100644 >> --- a/arch/x86/include/asm/vmx.h >> +++ b/arch/x86/include/asm/vmx.h >> @@ -73,6 +73,7 @@ >> #define SECONDARY_EXEC_PT_USE_GPA VMCS_CONTROL_BIT(PT_USE_GPA) >> #define SECONDARY_EXEC_TSC_SCALING VMCS_CONTROL_BIT(TSC_SCALING) >> #define SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE VMCS_CONTROL_BIT(USR_WAIT_PAUSE) >> +#define SECONDARY_EXEC_BUS_LOCK_DETECTION VMCS_CONTROL_BIT(BUS_LOCK_DETECTION) >> >> #define PIN_BASED_EXT_INTR_MASK VMCS_CONTROL_BIT(INTR_EXITING) >> #define PIN_BASED_NMI_EXITING VMCS_CONTROL_BIT(NMI_EXITING) >> diff --git a/arch/x86/include/asm/vmxfeatures.h b/arch/x86/include/asm/vmxfeatures.h >> index 9915990fd8cf..e80523346274 100644 >> --- a/arch/x86/include/asm/vmxfeatures.h >> +++ b/arch/x86/include/asm/vmxfeatures.h >> @@ -83,5 +83,6 @@ >> #define VMX_FEATURE_TSC_SCALING ( 2*32+ 25) /* Scale hardware TSC when read in guest */ >> #define VMX_FEATURE_USR_WAIT_PAUSE ( 2*32+ 26) /* Enable TPAUSE, UMONITOR, UMWAIT in guest */ >> #define VMX_FEATURE_ENCLV_EXITING ( 2*32+ 28) /* "" VM-Exit on ENCLV (leaf dependent) */ >> +#define VMX_FEATURE_BUS_LOCK_DETECTION ( 2*32+ 30) /* VM-Exit when bus lock caused */ >> >> #endif /* _ASM_X86_VMXFEATURES_H */ >> diff --git a/arch/x86/include/uapi/asm/kvm.h b/arch/x86/include/uapi/asm/kvm.h >> index 0780f97c1850..a1471c05f7f9 100644 >> --- a/arch/x86/include/uapi/asm/kvm.h >> +++ b/arch/x86/include/uapi/asm/kvm.h >> @@ -111,6 +111,7 @@ struct kvm_ioapic_state { >> #define KVM_NR_IRQCHIPS 3 >> >> #define KVM_RUN_X86_SMM (1 << 0) >> +#define KVM_RUN_BUS_LOCK (1 << 1) >> >> /* for KVM_GET_REGS and KVM_SET_REGS */ >> struct kvm_regs { >> diff --git a/arch/x86/include/uapi/asm/vmx.h b/arch/x86/include/uapi/asm/vmx.h >> index b8ff9e8ac0d5..14c177c4afd5 100644 >> --- a/arch/x86/include/uapi/asm/vmx.h >> +++ b/arch/x86/include/uapi/asm/vmx.h >> @@ -88,6 +88,7 @@ >> #define EXIT_REASON_XRSTORS 64 >> #define EXIT_REASON_UMWAIT 67 >> #define EXIT_REASON_TPAUSE 68 >> +#define EXIT_REASON_BUS_LOCK 74 >> >> #define VMX_EXIT_REASONS \ >> { EXIT_REASON_EXCEPTION_NMI, "EXCEPTION_NMI" }, \ >> @@ -148,7 +149,8 @@ >> { EXIT_REASON_XSAVES, "XSAVES" }, \ >> { EXIT_REASON_XRSTORS, "XRSTORS" }, \ >> { EXIT_REASON_UMWAIT, "UMWAIT" }, \ >> - { EXIT_REASON_TPAUSE, "TPAUSE" } >> + { EXIT_REASON_TPAUSE, "TPAUSE" }, \ >> + { EXIT_REASON_BUS_LOCK, "BUS_LOCK" } >> >> #define VMX_EXIT_REASON_FLAGS \ >> { VMX_EXIT_REASONS_FAILED_VMENTRY, "FAILED_VMENTRY" } >> diff --git a/arch/x86/kvm/vmx/capabilities.h b/arch/x86/kvm/vmx/capabilities.h >> index 4bbd8b448d22..aa94535e6705 100644 >> --- a/arch/x86/kvm/vmx/capabilities.h >> +++ b/arch/x86/kvm/vmx/capabilities.h >> @@ -262,6 +262,12 @@ static inline bool cpu_has_vmx_tsc_scaling(void) >> SECONDARY_EXEC_TSC_SCALING; >> } >> >> +static inline bool cpu_has_vmx_bus_lock_detection(void) >> +{ >> + return vmcs_config.cpu_based_2nd_exec_ctrl & >> + SECONDARY_EXEC_BUS_LOCK_DETECTION; >> +} >> + >> static inline bool cpu_has_vmx_apicv(void) >> { >> return cpu_has_vmx_apic_register_virt() && >> diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c >> index 89c131eaedf2..1560e51d2d8e 100644 >> --- a/arch/x86/kvm/vmx/vmx.c >> +++ b/arch/x86/kvm/vmx/vmx.c >> @@ -2460,7 +2460,8 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf, >> SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE | >> SECONDARY_EXEC_PT_USE_GPA | >> SECONDARY_EXEC_PT_CONCEAL_VMX | >> - SECONDARY_EXEC_ENABLE_VMFUNC; >> + SECONDARY_EXEC_ENABLE_VMFUNC | >> + SECONDARY_EXEC_BUS_LOCK_DETECTION; >> if (cpu_has_sgx()) >> opt2 |= SECONDARY_EXEC_ENCLS_EXITING; >> if (adjust_vmx_controls(min2, opt2, >> @@ -4247,6 +4248,9 @@ static void vmx_compute_secondary_exec_control(struct vcpu_vmx *vmx) >> } >> } >> >> + if (!kvm_bus_lock_exit_enabled(vmx->vcpu.kvm)) >> + exec_control &= ~SECONDARY_EXEC_BUS_LOCK_DETECTION; >> + >> vmx->secondary_exec_control = exec_control; >> } >> >> @@ -5661,6 +5665,16 @@ static int handle_encls(struct kvm_vcpu *vcpu) >> return 1; >> } >> >> +static int handle_bus_lock(struct kvm_vcpu *vcpu) >> +{ >> + struct kvm_run *kvm_run = vcpu->run; >> + >> + vcpu->stat.bus_locks++; >> + >> + kvm_run->exit_reason = KVM_EXIT_BUS_LOCK; >> + return 0; >> +} >> + >> /* >> * The exit handlers return 1 if the exit was handled fully and guest execution >> * may resume. Otherwise they set the kvm_run parameter to indicate what needs >> @@ -5717,6 +5731,7 @@ static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu) = { >> [EXIT_REASON_VMFUNC] = handle_vmx_instruction, >> [EXIT_REASON_PREEMPTION_TIMER] = handle_preemption_timer, >> [EXIT_REASON_ENCLS] = handle_encls, >> + [EXIT_REASON_BUS_LOCK] = handle_bus_lock, >> }; >> >> static const int kvm_vmx_max_exit_handlers = >> @@ -6809,6 +6824,19 @@ static fastpath_t vmx_vcpu_run(struct kvm_vcpu *vcpu) >> if (unlikely(vmx->exit_reason.failed_vmentry)) >> return EXIT_FASTPATH_NONE; >> >> + /* >> + * check the exit_reason to see if there is a bus lock >> + * happened in guest. >> + */ >> + if (kvm_bus_lock_exit_enabled(vmx->vcpu.kvm)) { >> + if (vmx->exit_reason.bus_lock_detected) { >> + vcpu->stat.bus_locks++; >> + vcpu->arch.bus_lock_detected = true; >> + } else { >> + vcpu->arch.bus_lock_detected = false; > > This is a fast path so I'm wondering if we can move bus_lock_detected > clearing somewhere else. > >> + } >> + } >> + >> vmx->loaded_vmcs->launched = 1; >> vmx->idt_vectoring_info = vmcs_read32(IDT_VECTORING_INFO_FIELD); >> >> @@ -8060,6 +8088,9 @@ static __init int hardware_setup(void) >> kvm_tsc_scaling_ratio_frac_bits = 48; >> } >> >> + if (cpu_has_vmx_bus_lock_detection()) >> + kvm_has_bus_lock_exit = true; >> + >> set_bit(0, vmx_vpid_bitmap); /* 0 is reserved for host */ >> >> if (enable_ept) >> diff --git a/arch/x86/kvm/vmx/vmx.h b/arch/x86/kvm/vmx/vmx.h >> index 06a91b224ef3..7e6d63a8589a 100644 >> --- a/arch/x86/kvm/vmx/vmx.h >> +++ b/arch/x86/kvm/vmx/vmx.h >> @@ -104,7 +104,7 @@ union vmx_exit_reason { >> u32 reserved23 : 1; >> u32 reserved24 : 1; >> u32 reserved25 : 1; >> - u32 reserved26 : 1; >> + u32 bus_lock_detected : 1; >> u32 enclave_mode : 1; >> u32 smi_pending_mtf : 1; >> u32 smi_from_vmx_root : 1; >> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c >> index 88c593f83b28..00a54d0cd7da 100644 >> --- a/arch/x86/kvm/x86.c >> +++ b/arch/x86/kvm/x86.c >> @@ -133,6 +133,8 @@ u64 __read_mostly kvm_max_tsc_scaling_ratio; >> EXPORT_SYMBOL_GPL(kvm_max_tsc_scaling_ratio); >> u64 __read_mostly kvm_default_tsc_scaling_ratio; >> EXPORT_SYMBOL_GPL(kvm_default_tsc_scaling_ratio); >> +bool __read_mostly kvm_has_bus_lock_exit; >> +EXPORT_SYMBOL_GPL(kvm_has_bus_lock_exit); >> >> /* tsc tolerance in parts per million - default to 1/2 of the NTP threshold */ >> static u32 __read_mostly tsc_tolerance_ppm = 250; >> @@ -220,6 +222,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = { >> VCPU_STAT("l1d_flush", l1d_flush), >> VCPU_STAT("halt_poll_success_ns", halt_poll_success_ns), >> VCPU_STAT("halt_poll_fail_ns", halt_poll_fail_ns), >> + VCPU_STAT("bus_locks", bus_locks), >> VM_STAT("mmu_shadow_zapped", mmu_shadow_zapped), >> VM_STAT("mmu_pte_write", mmu_pte_write), >> VM_STAT("mmu_pte_updated", mmu_pte_updated), >> @@ -3538,6 +3541,9 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) >> case KVM_CAP_HYPERV_ENLIGHTENED_VMCS: >> r = kvm_x86_ops.nested_ops->enable_evmcs != NULL; >> break; >> + case KVM_CAP_X86_BUS_LOCK_EXIT: >> + r = kvm_has_bus_lock_exit; >> + break; > > I think we can always report KVM_CAP_X86_BUS_LOCK_EXIT as supported > (meaning KVM itself supports it) ... > >> default: >> break; >> } >> @@ -4990,6 +4996,12 @@ int kvm_vm_ioctl_enable_cap(struct kvm *kvm, >> kvm->arch.exception_payload_enabled = cap->args[0]; >> r = 0; >> break; >> + case KVM_CAP_X86_BUS_LOCK_EXIT: >> + if (!kvm_has_bus_lock_exit) >> + return -EINVAL; > > ... because userspace can check for -EINVAL when enabling the cap. Or we > can return e.g. -EOPNOTSUPP here. I don't have a strong opinion on the matter.. >
Yea, this change is ok to me.
>> + kvm->arch.bus_lock_exit = cap->args[0]; >> + r = 0; >> + break; >> default: >> r = -EINVAL; >> break; >> @@ -7732,12 +7744,23 @@ static void post_kvm_run_save(struct kvm_vcpu *vcpu) >> struct kvm_run *kvm_run = vcpu->run; >> >> kvm_run->if_flag = (kvm_get_rflags(vcpu) & X86_EFLAGS_IF) != 0; >> - kvm_run->flags = is_smm(vcpu) ? KVM_RUN_X86_SMM : 0; >> kvm_run->cr8 = kvm_get_cr8(vcpu); >> kvm_run->apic_base = kvm_get_apic_base(vcpu); >> kvm_run->ready_for_interrupt_injection = >> pic_in_kernel(vcpu->kvm) || >> kvm_vcpu_ready_for_interrupt_injection(vcpu); >> + >> + if (is_smm(vcpu)) >> + kvm_run->flags |= KVM_RUN_X86_SMM; >> + else >> + kvm_run->flags &= ~KVM_RUN_X86_SMM; >> + >> + if (vcpu->arch.bus_lock_detected && >> + kvm_run->exit_reason != KVM_EXIT_BUS_LOCK) >> + kvm_run->flags |= KVM_RUN_BUS_LOCK; >> + else >> + kvm_run->flags &= ~KVM_RUN_BUS_LOCK; >> + >> } >> >> static void update_cr8_intercept(struct kvm_vcpu *vcpu) >> @@ -8597,6 +8620,17 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu) >> kvm_lapic_sync_from_vapic(vcpu); >> >> r = kvm_x86_ops.handle_exit(vcpu, exit_fastpath); >> + >> + /* >> + * Even when current exit reason is handled by KVM >> + * internally, we still needs to exit to user space >> + * when bus lock detected to inform that there is a >> + * bus lock in guest. >> + */ >> + if (r > 0 && vcpu->arch.bus_lock_detected) { >> + vcpu->run->exit_reason = KVM_EXIT_BUS_LOCK; >> + r = 0; > > Can we maybe reset bus_lock_detected here? >
I think we should place the reset work in post_kvm_run_save() which will set the kvm_run->flags based on it.
>> + } >> return r; >> >> cancel_injection: >> diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h >> index 6eb62e97e59f..d3b1095cc8fb 100644 >> --- a/arch/x86/kvm/x86.h >> +++ b/arch/x86/kvm/x86.h >> @@ -334,6 +334,11 @@ static inline bool kvm_cstate_in_guest(struct kvm *kvm) >> return kvm->arch.cstate_in_guest; >> } >> >> +static inline bool kvm_bus_lock_exit_enabled(struct kvm *kvm) >> +{ >> + return kvm->arch.bus_lock_exit; >> +} >> + >> DECLARE_PER_CPU(struct kvm_vcpu *, current_vcpu); >> >> static inline void kvm_before_interrupt(struct kvm_vcpu *vcpu) >> diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h >> index 4fdf30316582..e66aa4bdaf24 100644 >> --- a/include/uapi/linux/kvm.h >> +++ b/include/uapi/linux/kvm.h >> @@ -248,6 +248,7 @@ struct kvm_hyperv_exit { >> #define KVM_EXIT_IOAPIC_EOI 26 >> #define KVM_EXIT_HYPERV 27 >> #define KVM_EXIT_ARM_NISV 28 >> +#define KVM_EXIT_BUS_LOCK 29 >> >> /* For KVM_EXIT_INTERNAL_ERROR */ >> /* Emulate instruction failed. */ >> @@ -1031,6 +1032,7 @@ struct kvm_ppc_resize_hpt { >> #define KVM_CAP_PPC_SECURE_GUEST 181 >> #define KVM_CAP_HALT_POLL 182 >> #define KVM_CAP_ASYNC_PF_INT 183 >> +#define KVM_CAP_X86_BUS_LOCK_EXIT 184 >> >> #ifdef KVM_CAP_IRQ_ROUTING >
| |