lkml.org 
[lkml]   [2020]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] thermal/drivers/cpuidle_cooling: Change the set_cur_state function
From
Date
On 17/09/2020 08:00, zhuguangqing83@gmail.com wrote:
> From: zhuguangqing <zhuguangqing@xiaomi.com>
>
> In the function cpuidle_cooling_set_cur_state(), if current_state is
> not equal to state and both current_state and state are greater than
> 0(scene 4 as follows), then maybe it should stop->start or restart
> idle_inject.

Sorry, I don't get it.

It is an update of the state, why do we need to restart the idle
injection ? The state change will be automatically take into account by
the idle injection code at the new injection cycle.

> The scenes changed is as follows,
>
> scene current_state state action
> 1 0 >0 start
> 2 0 0 do nothing
> 3 >0 0 stop
> 4 >0 && !=state >0 stop->start or restart
> 5 >0 && ==state >0 do nothing
>
> Signed-off-by: zhuguangqing <zhuguangqing@xiaomi.com>
> ---
> drivers/thermal/cpuidle_cooling.c | 10 ++++++++--
> 1 file changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/thermal/cpuidle_cooling.c b/drivers/thermal/cpuidle_cooling.c
> index 78e3e8238116..868919ad3dda 100644
> --- a/drivers/thermal/cpuidle_cooling.c
> +++ b/drivers/thermal/cpuidle_cooling.c
> @@ -113,7 +113,7 @@ static int cpuidle_cooling_get_cur_state(struct thermal_cooling_device *cdev,
> /**
> * cpuidle_cooling_set_cur_state - Set the current cooling state
> * @cdev: the thermal cooling device
> - * @state: the target state
> + * @state: the target state, max value is 100
> *
> * The function checks first if we are initiating the mitigation which
> * in turn wakes up all the idle injection tasks belonging to the idle
> @@ -130,6 +130,9 @@ static int cpuidle_cooling_set_cur_state(struct thermal_cooling_device *cdev,
> unsigned long current_state = idle_cdev->state;
> unsigned int runtime_us, idle_duration_us;
>
> + if (state > 100 || current_state == state)
> + return 0;
> +
> idle_cdev->state = state;
>
> idle_inject_get_duration(ii_dev, &runtime_us, &idle_duration_us);
> @@ -140,8 +143,11 @@ static int cpuidle_cooling_set_cur_state(struct thermal_cooling_device *cdev,
>
> if (current_state == 0 && state > 0) {
> idle_inject_start(ii_dev);
> - } else if (current_state > 0 && !state) {
> + } else if (current_state > 0 && !state) {
> idle_inject_stop(ii_dev);
> + } else {
> + idle_inject_stop(ii_dev);
> + idle_inject_start(ii_dev);
> }
>
> return 0;
>


--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

\
 
 \ /
  Last update: 2020-09-17 09:07    [W:0.047 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site