lkml.org 
[lkml]   [2020]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 1/6] dt-bindings: mux-j7200-wiz: Add lane function defines
From
Date
Hi Peter & Nishanth,

On 16/09/2020 18:45, Nishanth Menon wrote:
> On 06:52-20200916, Peter Rosin wrote:
>> Hi,
>>
>> Sorry for the delay.
>>
>> On 2020-09-15 13:20, Roger Quadros wrote:
>>> Each SERDES lane mux can select upto 4 different IPs.
>>> There are 4 lanes in each J7200 SERDES. Define all
>>> the possible functions in this file.
>>>
>>> Cc: Peter Rosin <peda@axentia.se>
>>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>>> ---
>>> include/dt-bindings/mux/mux-j7200-wiz.h | 29 +++++++++++++++++++++++++
>>> 1 file changed, 29 insertions(+)
>>> create mode 100644 include/dt-bindings/mux/mux-j7200-wiz.h
>>>
>>> diff --git a/include/dt-bindings/mux/mux-j7200-wiz.h b/include/dt-bindings/mux/mux-j7200-wiz.h
>>> new file mode 100644
>>> index 000000000000..b091b1185a36
>>> --- /dev/null
>>> +++ b/include/dt-bindings/mux/mux-j7200-wiz.h
>>> @@ -0,0 +1,29 @@
>>> +/* SPDX-License-Identifier: GPL-2.0 */
>>> +/*
>>> + * This header provides constants for J7200 WIZ.
>>> + */
>>> +
>>> +#ifndef _DT_BINDINGS_J7200_WIZ
>>> +#define _DT_BINDINGS_J7200_WIZ
>>> +
>>> +#define SERDES0_LANE0_QSGMII_LANE3 0x0
>>> +#define SERDES0_LANE0_PCIE1_LANE0 0x1
>>> +#define SERDES0_LANE0_IP3_UNUSED 0x2
>>> +#define SERDES0_LANE0_IP4_UNUSED 0x3
>>> +
>>> +#define SERDES0_LANE1_QSGMII_LANE4 0x0
>>> +#define SERDES0_LANE1_PCIE1_LANE1 0x1
>>> +#define SERDES0_LANE1_IP3_UNUSED 0x2
>>> +#define SERDES0_LANE1_IP4_UNUSED 0x3
>>> +
>>> +#define SERDES0_LANE2_QSGMII_LANE1 0x0
>>> +#define SERDES0_LANE2_PCIE1_LANE2 0x1
>>> +#define SERDES0_LANE2_IP3_UNUSED 0x2
>>> +#define SERDES0_LANE2_IP4_UNUSED 0x3
>>> +
>>> +#define SERDES0_LANE3_QSGMII_LANE2 0x0
>>> +#define SERDES0_LANE3_PCIE1_LANE3 0x1
>>> +#define SERDES0_LANE3_USB 0x2
>>> +#define SERDES0_LANE3_IP4_UNUSED 0x3
>>> +
>>> +#endif /* _DT_BINDINGS_J7200_WIZ */
>>
>> Should not the defines start with J7200_WIZ? SERDES0 seems like a too
>> generic prefix, at least to me.
>
> Thanks, good point. I am not sure if WIZ should even be used.. It is
> a TI internal prefix for various serdes solutions, but I agree that
> SERDES0 is too generic a terminology. That said, we should cleanup
> include/dt-bindings/mux/mux-j721e-wiz.h as well, prior to introducing
> j7200 changes.
>

I'm planning to put all TI SERDES definitions in one header file "ti-serdes-mux.h"
and add SOC specific prefixes to the macros.

This will mean some churn in the existing DT files. (only 2 so far)

Are you guys OK if I do the change in one patch to avoid a broken build in between.
You guys can then decide whose tree it goes through.

The new SoC addition will be separate of course.

cheers,
-roger
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2020-09-17 14:29    [W:0.086 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site