lkml.org 
[lkml]   [2020]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3] media: rcar-vin: Enable YDS bit depending on bus_width and data_shift
From
Date
Hi Prabhakar,

Can you rebase this patch? It no longer applies.

Regards,

Hans

On 13/09/2020 20:16, Lad Prabhakar wrote:
> Enable YDS bit if bus_width and data_shift is set to 8 in parallel mode
> for MEDIA_BUS_FMT_UYVY8_2X8 format.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
> ---
> Changes for v3:
> * Dropped BIT macro
> * Introduced struct v4l2_fwnode_bus_parallel
>
> Changes for v2:
> * Dropped DT binding documentation patch
> * Select the data pins depending on bus-width and data-shift
>
> v1 -
> https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=323799
> ---
> drivers/media/platform/rcar-vin/rcar-core.c | 9 ++++-----
> drivers/media/platform/rcar-vin/rcar-dma.c | 17 ++++++++++++++---
> drivers/media/platform/rcar-vin/rcar-vin.h | 5 +++--
> 3 files changed, 21 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
> index 7440c8965d27..1149ab76cf5c 100644
> --- a/drivers/media/platform/rcar-vin/rcar-core.c
> +++ b/drivers/media/platform/rcar-vin/rcar-core.c
> @@ -626,12 +626,11 @@ static int rvin_parallel_parse_v4l2(struct device *dev,
>
> switch (vin->parallel->mbus_type) {
> case V4L2_MBUS_PARALLEL:
> - vin_dbg(vin, "Found PARALLEL media bus\n");
> - vin->parallel->mbus_flags = vep->bus.parallel.flags;
> - break;
> case V4L2_MBUS_BT656:
> - vin_dbg(vin, "Found BT656 media bus\n");
> - vin->parallel->mbus_flags = 0;
> + vin_dbg(vin, "Found %s media bus\n",
> + vin->parallel->mbus_type == V4L2_MBUS_PARALLEL ?
> + "PARALLEL" : "BT656");
> + vin->parallel->bus = vep->bus.parallel;
> break;
> default:
> vin_err(vin, "Unknown media bus type\n");
> diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
> index a5dbb90c5210..d067439b0b0d 100644
> --- a/drivers/media/platform/rcar-vin/rcar-dma.c
> +++ b/drivers/media/platform/rcar-vin/rcar-dma.c
> @@ -125,6 +125,7 @@
> #define VNDMR2_VPS (1 << 30)
> #define VNDMR2_HPS (1 << 29)
> #define VNDMR2_CES (1 << 28)
> +#define VNDMR2_YDS (1 << 22)
> #define VNDMR2_FTEV (1 << 17)
> #define VNDMR2_VLV(n) ((n & 0xf) << 12)
>
> @@ -698,16 +699,26 @@ static int rvin_setup(struct rvin_dev *vin)
>
> if (!vin->is_csi) {
> /* Hsync Signal Polarity Select */
> - if (!(vin->parallel->mbus_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW))
> + if (!(vin->parallel->bus.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW))
> dmr2 |= VNDMR2_HPS;
>
> /* Vsync Signal Polarity Select */
> - if (!(vin->parallel->mbus_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW))
> + if (!(vin->parallel->bus.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW))
> dmr2 |= VNDMR2_VPS;
>
> /* Data Enable Polarity Select */
> - if (vin->parallel->mbus_flags & V4L2_MBUS_DATA_ENABLE_LOW)
> + if (vin->parallel->bus.flags & V4L2_MBUS_DATA_ENABLE_LOW)
> dmr2 |= VNDMR2_CES;
> +
> + switch (vin->mbus_code) {
> + case MEDIA_BUS_FMT_UYVY8_2X8:
> + if (vin->parallel->bus.bus_width == 8 &&
> + vin->parallel->bus.data_shift == 8)
> + dmr2 |= VNDMR2_YDS;
> + break;
> + default:
> + break;
> + }
> }
>
> /*
> diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
> index c19d077ce1cb..8396e0e45478 100644
> --- a/drivers/media/platform/rcar-vin/rcar-vin.h
> +++ b/drivers/media/platform/rcar-vin/rcar-vin.h
> @@ -19,6 +19,7 @@
> #include <media/v4l2-ctrls.h>
> #include <media/v4l2-dev.h>
> #include <media/v4l2-device.h>
> +#include <media/v4l2-fwnode.h>
> #include <media/videobuf2-v4l2.h>
>
> /* Number of HW buffers */
> @@ -92,7 +93,7 @@ struct rvin_video_format {
> * @asd: sub-device descriptor for async framework
> * @subdev: subdevice matched using async framework
> * @mbus_type: media bus type
> - * @mbus_flags: media bus configuration flags
> + * @bus: media bus parallel configuration
> * @source_pad: source pad of remote subdevice
> * @sink_pad: sink pad of remote subdevice
> *
> @@ -102,7 +103,7 @@ struct rvin_parallel_entity {
> struct v4l2_subdev *subdev;
>
> enum v4l2_mbus_type mbus_type;
> - unsigned int mbus_flags;
> + struct v4l2_fwnode_bus_parallel bus;
>
> unsigned int source_pad;
> unsigned int sink_pad;
>

\
 
 \ /
  Last update: 2020-09-17 10:59    [W:0.119 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site