lkml.org 
[lkml]   [2020]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 5.4 037/330] ice: Fix to change Rx/Tx ring descriptor size via ethtool with DCBx
Date
From: Usha Ketineni <usha.k.ketineni@intel.com>

[ Upstream commit c0a3665f71a2f086800abea4d9d14d28269089d6 ]

This patch fixes the call trace caused by the kernel when the Rx/Tx
descriptor size change request is initiated via ethtool when DCB is
configured. ice_set_ringparam() should use vsi->num_txq instead of
vsi->alloc_txq as it represents the queues that are enabled in the
driver when DCB is enabled/disabled. Otherwise, queue index being
used can go out of range.

For example, when vsi->alloc_txq has 104 queues and with 3 TCS enabled
via DCB, each TC gets 34 queues, vsi->num_txq will be 102 and only 102
queues will be enabled.

Signed-off-by: Usha Ketineni <usha.k.ketineni@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/ice/ice_ethtool.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index 62673e27af0e8..fc9ff985a62bd 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -2635,14 +2635,14 @@ ice_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
netdev_info(netdev, "Changing Tx descriptor count from %d to %d\n",
vsi->tx_rings[0]->count, new_tx_cnt);

- tx_rings = devm_kcalloc(&pf->pdev->dev, vsi->alloc_txq,
+ tx_rings = devm_kcalloc(&pf->pdev->dev, vsi->num_txq,
sizeof(*tx_rings), GFP_KERNEL);
if (!tx_rings) {
err = -ENOMEM;
goto done;
}

- for (i = 0; i < vsi->alloc_txq; i++) {
+ ice_for_each_txq(vsi, i) {
/* clone ring and setup updated count */
tx_rings[i] = *vsi->tx_rings[i];
tx_rings[i].count = new_tx_cnt;
@@ -2667,14 +2667,14 @@ process_rx:
netdev_info(netdev, "Changing Rx descriptor count from %d to %d\n",
vsi->rx_rings[0]->count, new_rx_cnt);

- rx_rings = devm_kcalloc(&pf->pdev->dev, vsi->alloc_rxq,
+ rx_rings = devm_kcalloc(&pf->pdev->dev, vsi->num_rxq,
sizeof(*rx_rings), GFP_KERNEL);
if (!rx_rings) {
err = -ENOMEM;
goto done;
}

- for (i = 0; i < vsi->alloc_rxq; i++) {
+ ice_for_each_rxq(vsi, i) {
/* clone ring and setup updated count */
rx_rings[i] = *vsi->rx_rings[i];
rx_rings[i].count = new_rx_cnt;
@@ -2712,7 +2712,7 @@ process_link:
ice_down(vsi);

if (tx_rings) {
- for (i = 0; i < vsi->alloc_txq; i++) {
+ ice_for_each_txq(vsi, i) {
ice_free_tx_ring(vsi->tx_rings[i]);
*vsi->tx_rings[i] = tx_rings[i];
}
@@ -2720,7 +2720,7 @@ process_link:
}

if (rx_rings) {
- for (i = 0; i < vsi->alloc_rxq; i++) {
+ ice_for_each_rxq(vsi, i) {
ice_free_rx_ring(vsi->rx_rings[i]);
/* copy the real tail offset */
rx_rings[i].tail = vsi->rx_rings[i]->tail;
@@ -2744,7 +2744,7 @@ process_link:
free_tx:
/* error cleanup if the Rx allocations failed after getting Tx */
if (tx_rings) {
- for (i = 0; i < vsi->alloc_txq; i++)
+ ice_for_each_txq(vsi, i)
ice_free_tx_ring(&tx_rings[i]);
devm_kfree(&pf->pdev->dev, tx_rings);
}
--
2.25.1
\
 
 \ /
  Last update: 2020-09-18 05:14    [W:1.151 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site