lkml.org 
[lkml]   [2020]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v1 5/6] regulator: Support ROHM BD9576MUF and BD9573MUF
Add initial support for ROHM BD9576MUF and BD9573MUF PMICs regulators.
These PMICs are mainly used to power the R-Car series processors.

The BD9576 includes some functional-safety features which are not
present on BD9573.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
---
drivers/regulator/Kconfig | 10 +
drivers/regulator/Makefile | 1 +
drivers/regulator/bd9576-regulator.c | 337 +++++++++++++++++++++++++++
3 files changed, 348 insertions(+)
create mode 100644 drivers/regulator/bd9576-regulator.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index de17ef7e18f0..49e698c042b8 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -231,6 +231,16 @@ config REGULATOR_BD9571MWV
This driver can also be built as a module. If so, the module
will be called bd9571mwv-regulator.

+config REGULATOR_BD957XMUF
+ tristate "ROHM BD9576MUF and BD9573MUF Regulators"
+ depends on MFD_ROHM_BD957XMUF
+ help
+ This driver supports voltage regulators on ROHM BD9576MUF and
+ BD9573MUF PMICs.
+
+ This driver can also be built as a module. If so, the module
+ will be called bd9576-regulator.
+
config REGULATOR_CPCAP
tristate "Motorola CPCAP regulator"
depends on MFD_CPCAP
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index d8d3ecf526a8..92f50f12ca6d 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_REGULATOR_BD70528) += bd70528-regulator.o
obj-$(CONFIG_REGULATOR_BD71828) += bd71828-regulator.o
obj-$(CONFIG_REGULATOR_BD718XX) += bd718x7-regulator.o
obj-$(CONFIG_REGULATOR_BD9571MWV) += bd9571mwv-regulator.o
+obj-$(CONFIG_REGULATOR_BD957XMUF) += bd9576-regulator.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x-regulator.o
obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o
obj-$(CONFIG_REGULATOR_DA9055) += da9055-regulator.o
diff --git a/drivers/regulator/bd9576-regulator.c b/drivers/regulator/bd9576-regulator.c
new file mode 100644
index 000000000000..4137fa9a73bb
--- /dev/null
+++ b/drivers/regulator/bd9576-regulator.c
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2020 ROHM Semiconductors
+// ROHM BD9576MUF/BD9573MUF regulator driver
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/rohm-bd957x.h>
+#include <linux/mfd/rohm-generic.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/slab.h>
+
+#define BD957X_VOUTS1_VOLT 3300000
+#define BD957X_VOUTS4_BASE_VOLT 1030000
+#define BD957X_VOUTS34_NUM_VOLT 32
+
+static int vout1_volt_table[] = {5000000, 4900000, 4800000, 4700000, 4600000,
+ 4500000, 4500000, 4500000, 5000000, 5100000,
+ 5200000, 5300000, 5400000, 5500000, 5500000,
+ 5500000};
+
+static int vout2_volt_table[] = {1800000, 1780000, 1760000, 1740000, 1720000,
+ 1700000, 1680000, 1660000, 1800000, 1820000,
+ 1840000, 1860000, 1880000, 1900000, 1920000,
+ 1940000};
+
+static int voutl1_volt_table[] = {2500000, 2540000, 2580000, 2620000, 2660000,
+ 2700000, 2740000, 2780000, 2500000, 2460000,
+ 2420000, 2380000, 2340000, 2300000, 2260000,
+ 2220000};
+
+struct bd957x_regulator_data {
+ struct regulator_desc desc;
+ int base_voltage;
+};
+
+static int bd957x_vout34_list_voltage(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ const struct regulator_desc *desc = rdev->desc;
+ int multiplier = selector & desc->vsel_mask & 0x7f;
+ int tune;
+
+ /* VOUT3 and 4 has 10mV step */
+ tune = multiplier * 10000;
+
+ if (!(selector & 0x80))
+ return desc->fixed_uV - tune;
+
+ return desc->fixed_uV + tune;
+}
+
+static int bd957x_list_voltage(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ const struct regulator_desc *desc = rdev->desc;
+ int index = selector & desc->vsel_mask & 0x7f;
+
+ if (!(selector & 0x80))
+ index += desc->n_voltages/2;
+
+ if (index >= desc->n_voltages)
+ return -EINVAL;
+
+ return desc->volt_table[index];
+}
+
+static const struct regulator_ops bd957x_vout34_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = bd957x_vout34_list_voltage,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static const struct regulator_ops bd957X_vouts1_regulator_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+};
+
+static const struct regulator_ops bd957x_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = bd957x_list_voltage,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static struct bd957x_regulator_data bd9576_regulators[] = {
+ {
+ .desc = {
+ .name = "VD50",
+ .of_match = of_match_ptr("regulator-vd50"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD957X_VD50,
+ .type = REGULATOR_VOLTAGE,
+ .ops = &bd957x_ops,
+ .volt_table = &vout1_volt_table[0],
+ .n_voltages = ARRAY_SIZE(vout1_volt_table),
+ .vsel_reg = BD957X_REG_VOUT1_TUNE,
+ .vsel_mask = BD957X_MASK_VOUT1_TUNE,
+ .enable_reg = BD957X_REG_POW_TRIGGER1,
+ .enable_mask = BD957X_REGULATOR_EN_MASK,
+ .enable_val = BD957X_REGULATOR_DIS_VAL,
+ .enable_is_inverted = true,
+ .owner = THIS_MODULE,
+ },
+ },
+ {
+ .desc = {
+ .name = "VD18",
+ .of_match = of_match_ptr("regulator-vd18"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD957X_VD18,
+ .type = REGULATOR_VOLTAGE,
+ .ops = &bd957x_ops,
+ .volt_table = &vout2_volt_table[0],
+ .n_voltages = ARRAY_SIZE(vout2_volt_table),
+ .vsel_reg = BD957X_REG_VOUT2_TUNE,
+ .vsel_mask = BD957X_MASK_VOUT2_TUNE,
+ .enable_reg = BD957X_REG_POW_TRIGGER2,
+ .enable_mask = BD957X_REGULATOR_EN_MASK,
+ .enable_val = BD957X_REGULATOR_DIS_VAL,
+ .enable_is_inverted = true,
+ .owner = THIS_MODULE,
+ },
+ },
+ {
+ .desc = {
+ .name = "VDDDR",
+ .of_match = of_match_ptr("regulator-vdddr"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD957X_VDDDR,
+ .ops = &bd957x_vout34_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = BD957X_VOUTS34_NUM_VOLT,
+ .vsel_reg = BD957X_REG_VOUT3_TUNE,
+ .vsel_mask = BD957X_MASK_VOUT3_TUNE,
+ .enable_reg = BD957X_REG_POW_TRIGGER3,
+ .enable_mask = BD957X_REGULATOR_EN_MASK,
+ .enable_val = BD957X_REGULATOR_DIS_VAL,
+ .enable_is_inverted = true,
+ .owner = THIS_MODULE,
+ },
+ },
+ {
+ .desc = {
+ .name = "VD10",
+ .of_match = of_match_ptr("regulator-vd10"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD957X_VD10,
+ .ops = &bd957x_vout34_ops,
+ .type = REGULATOR_VOLTAGE,
+ .fixed_uV = BD957X_VOUTS4_BASE_VOLT,
+ .n_voltages = BD957X_VOUTS34_NUM_VOLT,
+ .vsel_reg = BD957X_REG_VOUT4_TUNE,
+ .vsel_mask = BD957X_MASK_VOUT4_TUNE,
+ .enable_reg = BD957X_REG_POW_TRIGGER4,
+ .enable_mask = BD957X_REGULATOR_EN_MASK,
+ .enable_val = BD957X_REGULATOR_DIS_VAL,
+ .enable_is_inverted = true,
+ .owner = THIS_MODULE,
+ },
+ },
+ {
+ .desc = {
+ .name = "VOUTL1",
+ .of_match = of_match_ptr("regulator-voutl1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD957X_VOUTL1,
+ .ops = &bd957x_ops,
+ .type = REGULATOR_VOLTAGE,
+ .volt_table = &voutl1_volt_table[0],
+ .n_voltages = ARRAY_SIZE(voutl1_volt_table),
+ .vsel_reg = BD957X_REG_VOUTL1_TUNE,
+ .vsel_mask = BD957X_MASK_VOUTL1_TUNE,
+ .enable_reg = BD957X_REG_POW_TRIGGERL1,
+ .enable_mask = BD957X_REGULATOR_EN_MASK,
+ .enable_val = BD957X_REGULATOR_DIS_VAL,
+ .enable_is_inverted = true,
+ .owner = THIS_MODULE,
+ },
+ },
+ {
+ .desc = {
+ .name = "VOUTS1",
+ .of_match = of_match_ptr("regulator-vouts1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD957X_VOUTS1,
+ .ops = &bd957X_vouts1_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 1,
+ .fixed_uV = BD957X_VOUTS1_VOLT,
+ .enable_reg = BD957X_REG_POW_TRIGGERS1,
+ .enable_mask = BD957X_REGULATOR_EN_MASK,
+ .enable_val = BD957X_REGULATOR_DIS_VAL,
+ .enable_is_inverted = true,
+ .owner = THIS_MODULE,
+ },
+ },
+};
+
+static int bd957x_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap;
+ struct regulator_config config = { 0 };
+ int i, err;
+ bool vout_mode, ddr_sel;
+ const struct bd957x_regulator_data *reg_data = &bd9576_regulators[0];
+ unsigned int num_reg_data = ARRAY_SIZE(bd9576_regulators);
+ enum rohm_chip_type chip = platform_get_device_id(pdev)->driver_data;
+
+ regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!regmap) {
+ dev_err(&pdev->dev, "No regmap\n");
+ return -EINVAL;
+ }
+ vout_mode = of_property_read_bool(pdev->dev.parent->of_node,
+ "rohm,vout1-en-low");
+ if (vout_mode) {
+ struct gpio_desc *en;
+
+ dev_dbg(&pdev->dev, "GPIO controlled mode\n");
+
+ /* VOUT1 enable state judged by VOUT1_EN pin */
+ /* See if we have GPIO defined */
+ en = devm_gpiod_get_from_of_node(&pdev->dev,
+ pdev->dev.parent->of_node,
+ "rohm,vout1-en-gpios", 0,
+ GPIOD_OUT_LOW, "vout1-en");
+ if (!IS_ERR(en)) {
+ /* VOUT1_OPS gpio ctrl */
+ /*
+ * Regulator core prioritizes the ena_gpio over
+ * enable/disable/is_enabled callbacks so no need to
+ * clear them. We can still use same ops
+ */
+ config.ena_gpiod = en;
+ } else {
+ /*
+ * In theory it is possible someone wants to set
+ * vout1-en LOW during OTP loading and set VOUT1 to be
+ * controlled by GPIO - but control the GPIO from some
+ * where else than this driver. For that to work we
+ * should unset the is_enabled callback here.
+ *
+ * I believe such case where rohm,vout1-en-low is set
+ * and vout1-en-gpios is not is likely to be a
+ * misconfiguration. So let's just err out for now.
+ */
+ dev_err(&pdev->dev,
+ "Failed to get VOUT1 control GPIO\n");
+ return PTR_ERR(en);
+ }
+ }
+
+ /*
+ * If more than one PMIC needs to be controlled by same processor then
+ * allocate the regulator data array here and use bd9576_regulators as
+ * template. At the moment I see no such use-case so I spare some
+ * bytes and use bd9576_regulators directly for non-constant configs
+ * like DDR voltage selection.
+ */
+ ddr_sel = of_property_read_bool(pdev->dev.parent->of_node,
+ "rohm,ddr-sel-low");
+ if (ddr_sel)
+ bd9576_regulators[2].desc.fixed_uV = 1350000;
+ else
+ bd9576_regulators[2].desc.fixed_uV = 1500000;
+
+ switch (chip) {
+ case ROHM_CHIP_TYPE_BD9576:
+ dev_dbg(&pdev->dev, "Found BD9576MUF\n");
+ break;
+ case ROHM_CHIP_TYPE_BD9573:
+ pr_info(&pdev->dev, "Found BD9573MUF\n");
+ break;
+ default:
+ dev_err(&pdev->dev, "Unsupported chip type\n");
+ err = -EINVAL;
+ goto err;
+ }
+
+ config.dev = pdev->dev.parent;
+ config.regmap = regmap;
+
+ for (i = 0; i < num_reg_data; i++) {
+
+ const struct regulator_desc *desc;
+ struct regulator_dev *rdev;
+ const struct bd957x_regulator_data *r;
+
+ r = &reg_data[i];
+ desc = &r->desc;
+
+ rdev = devm_regulator_register(&pdev->dev, desc, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev,
+ "failed to register %s regulator\n",
+ desc->name);
+ err = PTR_ERR(rdev);
+ goto err;
+ }
+ /*
+ * Clear the VOUT1 GPIO setting - rest of the regulators do not
+ * support GPIO control
+ */
+ config.ena_gpiod = NULL;
+ }
+
+err:
+ return err;
+}
+
+static const struct platform_device_id bd957x_pmic_id[] = {
+ { "bd9573-pmic", ROHM_CHIP_TYPE_BD9573 },
+ { "bd9576-pmic", ROHM_CHIP_TYPE_BD9576 },
+ { },
+};
+MODULE_DEVICE_TABLE(platform, bd957x_pmic_id);
+
+static struct platform_driver bd957x_regulator = {
+ .driver = {
+ .name = "bd957x-pmic",
+ },
+ .probe = bd957x_probe,
+ .id_table = bd957x_pmic_id,
+};
+
+module_platform_driver(bd957x_regulator);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("ROHM BD9576/BD9573 voltage regulator driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:bd957x-pmic");
--
2.21.0

--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]

\
 
 \ /
  Last update: 2020-09-17 10:08    [W:0.231 / U:1.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site