lkml.org 
[lkml]   [2020]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v2] media: cedrus: Propagate OUTPUT resolution to CAPTURE
From
Date
Le jeudi 17 septembre 2020 à 20:27 -0400, Nicolas Dufresne a écrit :
> As per spec, the CAPTURE resolution should be automatically set based on
> the OTUPUT resolution. This patch properly propagate width/height to the
> capture when the OUTPUT format is set and override the user provided
> width/height with configured OUTPUT resolution when the CAPTURE fmt is
> updated.
>
> This also prevents userspace from selecting a CAPTURE resolution that is
> too small, avoiding kernel oops.

Just in case it wasn't obvious, this is fully reproducible oops
whenever you use GStreamer 1.18. Here's a copy of Ondrej report from
today which thankfully allowed me to realized I had never completed
this patch. Pretty much all kernel that includes Cedrus are to be
affect, though is a staging driver on staging API of course.

---

I tried testing cedrus with gstreamer 1.18 and it managed to crash the
kernel on
A64. I used:

gst-launch-1.0 filesrc location=test.mkv ! matroskademux ! queue !
h264parse ! v4l2slh264dec ! filesink location=aaa.dat

Unable to handle kernel paging request at virtual address
8080808080808088
Mem abort info:
ESR = 0x96000044
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000044
CM = 0, WnR = 1
[8080808080808088] address between user and kernel address ranges
Internal error: Oops: 96000044 [#1] SMP
Modules linked in: modem_power hci_uart btrtl bluetooth ecdh_generic
ecc sunxi_cedrus(C) sun8i_ce crypto_engine snd_soc_bt_sco
snd_soc_simple_card snd_soc_simple_card_utils snd_soc_simple_amplifier
sun50i_codec_analog sun8i_codec sun8i_adda_pr_regmap snd_soc_ec25
sun4i_i2s snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer snd
soundcore stk3310 inv_mpu6050_i2c inv_mpu6050 st_magn_i2c
st_sensors_i2c st_magn st_sensors industrialio_triggered_buffer
kfifo_buf regmap_i2c option usb_wwan usbserial anx7688 ohci_platform
ohci_hcd ehci_platform ehci_hcd g_cdc usb_f_acm u_serial usb_f_ecm
u_ether libcomposite sunxi phy_generic musb_hdrc udc_core usbcore
sun8i_rotate v4l2_mem2mem gc2145 ov5640 sun6i_csi videobuf2_dma_contig
v4l2_fwnode videobuf2_memops videobuf2_v4l2 videobuf2_common videodev
mc 8723cs(C) cfg80211 rfkill lima gpu_sched goodix
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G C 5.9.0-rc5-
00386-g4fe2ef82bd0b #62
Hardware name: Pine64 PinePhone (1.2) (DT)
pstate: 80000085 (Nzcv daIf -PAN -UAO BTYPE=--)
pc : v4l2_m2m_buf_remove+0x44/0x90 [v4l2_mem2mem]
lr : v4l2_m2m_buf_remove+0x18/0x90 [v4l2_mem2mem]
sp : ffffffc010c8be20
x29: ffffffc010c8be20 x28: ffffffc010bb2fc0
x27: 0000000000000060 x26: ffffffc010935e58
x25: ffffffc010c06a5a x24: 0000000000000080
x23: 0000000000000005 x22: ffffffc010c8bf4c
x21: ffffff806ba0d088 x20: ffffff80687d1800
x19: ffffff8066c40298 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 000001b66678fd80 x14: 0000000000000204
x13: 0000000000000001 x12: 0000000000000040
x11: ffffff806f0c0248 x10: ffffff806f0c024a
x9 : ffffffc010bbdac8 x8 : ffffff806f000270
x7 : 0000000000000000 x6 : dead000000000100
x5 : dead000000000122 x4 : 0000000000000000
x3 : 8080808080808080 x2 : 8080808080808080
x1 : ffffff80641327a8 x0 : 0000000000000080
Call trace:
v4l2_m2m_buf_remove+0x44/0x90 [v4l2_mem2mem]
v4l2_m2m_buf_done_and_job_finish+0x34/0x140 [v4l2_mem2mem]
cedrus_irq+0x8c/0xc0 [sunxi_cedrus]
__handle_irq_event_percpu+0x54/0x150
handle_irq_event+0x4c/0xec
handle_fasteoi_irq+0xbc/0x1c0
__handle_domain_irq+0x78/0xdc
gic_handle_irq+0x50/0xa0
el1_irq+0xb8/0x140
arch_cpu_idle+0x10/0x14
cpu_startup_entry+0x24/0x60
rest_init+0xb0/0xbc
arch_call_rest_init+0xc/0x14
start_kernel+0x690/0x6b0
Code: f2fbd5a6 f2fbd5a5 52800004 a9400823 (f9000462)
---[ end trace 88233b9a76cdb261 ]---
Kernel panic - not syncing: Fatal exception in interrupt

>
> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
> Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> Tested-by: Ondrej Jirman <megous@megous.com>
> ---
> .../staging/media/sunxi/cedrus/cedrus_video.c | 29 +++++++++++++++++--
> 1 file changed, 27 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_video.c b/drivers/staging/media/sunxi/cedrus/cedrus_video.c
> index 16d82309e7b6..667b86dde1ee 100644
> --- a/drivers/staging/media/sunxi/cedrus/cedrus_video.c
> +++ b/drivers/staging/media/sunxi/cedrus/cedrus_video.c
> @@ -247,6 +247,8 @@ static int cedrus_try_fmt_vid_cap(struct file *file, void *priv,
> return -EINVAL;
>
> pix_fmt->pixelformat = fmt->pixelformat;
> + pix_fmt->width = ctx->src_fmt.width;
> + pix_fmt->height = ctx->src_fmt.height;
> cedrus_prepare_format(pix_fmt);
>
> return 0;
> @@ -296,10 +298,30 @@ static int cedrus_s_fmt_vid_out(struct file *file, void *priv,
> {
> struct cedrus_ctx *ctx = cedrus_file2ctx(file);
> struct vb2_queue *vq;
> + struct vb2_queue *peer_vq;
> int ret;
>
> + ret = cedrus_try_fmt_vid_out(file, priv, f);
> + if (ret)
> + return ret;
> +
> vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
> - if (vb2_is_busy(vq))
> + /*
> + * In order to support dynamic resolution change,
> + * the decoder admits a resolution change, as long
> + * as the pixelformat remains. Can't be done if streaming.
> + */
> + if (vb2_is_streaming(vq) || (vb2_is_busy(vq) &&
> + f->fmt.pix.pixelformat != ctx->src_fmt.pixelformat))
> + return -EBUSY;
> + /*
> + * Since format change on the OUTPUT queue will reset
> + * the CAPTURE queue, we can't allow doing so
> + * when the CAPTURE queue has buffers allocated.
> + */
> + peer_vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx,
> + V4L2_BUF_TYPE_VIDEO_CAPTURE);
> + if (vb2_is_busy(peer_vq))
> return -EBUSY;
>
> ret = cedrus_try_fmt_vid_out(file, priv, f);
> @@ -319,11 +341,14 @@ static int cedrus_s_fmt_vid_out(struct file *file, void *priv,
> break;
> }
>
> - /* Propagate colorspace information to capture. */
> + /* Propagate format information to capture. */
> ctx->dst_fmt.colorspace = f->fmt.pix.colorspace;
> ctx->dst_fmt.xfer_func = f->fmt.pix.xfer_func;
> ctx->dst_fmt.ycbcr_enc = f->fmt.pix.ycbcr_enc;
> ctx->dst_fmt.quantization = f->fmt.pix.quantization;
> + ctx->dst_fmt.width = ctx->src_fmt.width;
> + ctx->dst_fmt.height = ctx->src_fmt.height;
> + cedrus_prepare_format(&ctx->dst_fmt);
>
> return 0;
> }
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-09-18 02:45    [W:0.047 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site