lkml.org 
[lkml]   [2020]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH leds v2 25/50] leds: is31fl319x: compute aggregated max current separately
Date
Parse `led-max-current` property of child nodes and compute aggregated
value in a separate function. The controller cannot set this value
separately for every LED, so there is no need to store this value for
every LED.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
---
drivers/leds/leds-is31fl319x.c | 61 ++++++++++++++++++++++------------
1 file changed, 39 insertions(+), 22 deletions(-)

diff --git a/drivers/leds/leds-is31fl319x.c b/drivers/leds/leds-is31fl319x.c
index 4161b9dd7e488..ba1a5da5521b5 100644
--- a/drivers/leds/leds-is31fl319x.c
+++ b/drivers/leds/leds-is31fl319x.c
@@ -71,7 +71,6 @@ struct is31fl319x_chip {
struct is31fl319x_led {
struct is31fl319x_chip *chip;
struct led_classdev cdev;
- u32 max_microamp;
bool configured;
} leds[IS31FL319X_MAX_LEDS];
};
@@ -171,6 +170,35 @@ static int is31fl319x_brightness_set(struct led_classdev *cdev,
return ret;
}

+static int is31fl319x_parse_max_current(struct device *dev, u32 *aggregated)
+{
+ struct device_node *np;
+ u32 value;
+ int ret;
+
+ *aggregated = IS31FL319X_CURRENT_MAX;
+
+ for_each_available_child_of_node(dev_of_node(dev), np) {
+ value = IS31FL319X_CURRENT_DEFAULT;
+ ret = of_property_read_u32(np, "led-max-microamp", &value);
+ if (!ret)
+ value = min(value, IS31FL319X_CURRENT_MAX);
+
+ if (value < IS31FL319X_CURRENT_MIN) {
+ dev_err(dev,
+ "Value of led-max-microamp too low for %pOF\n",
+ np);
+ of_node_put(np);
+ return -EINVAL;
+ }
+
+ if (value < *aggregated)
+ *aggregated = value;
+ }
+
+ return 0;
+}
+
static int is31fl319x_parse_child_dt(const struct device *dev,
const struct device_node *child,
struct is31fl319x_led *led)
@@ -186,16 +214,6 @@ static int is31fl319x_parse_child_dt(const struct device *dev,
if (ret < 0 && ret != -EINVAL) /* is optional */
return ret;

- led->max_microamp = IS31FL319X_CURRENT_DEFAULT;
- ret = of_property_read_u32(child, "led-max-microamp",
- &led->max_microamp);
- if (!ret) {
- if (led->max_microamp < IS31FL319X_CURRENT_MIN)
- return -EINVAL; /* not supported */
- led->max_microamp = min(led->max_microamp,
- IS31FL319X_CURRENT_MAX);
- }
-
return 0;
}

@@ -339,11 +357,20 @@ static int is31fl319x_probe(struct i2c_client *client,
struct device *dev = &client->dev;
int err;
int i = 0;
- u32 aggregated_led_microamp = IS31FL319X_CURRENT_MAX;
+ u32 aggregated_led_microamp;

if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
return -EIO;

+ /*
+ * Kernel conventions require per-LED led-max-microamp property.
+ * But the chip does not allow to limit individual LEDs.
+ * So we take minimum from all subnodes for safety of hardware.
+ */
+ err = is31fl319x_parse_max_current(dev, &aggregated_led_microamp);
+ if (err)
+ return err;
+
is31 = devm_kzalloc(&client->dev, sizeof(*is31), GFP_KERNEL);
if (!is31)
return -ENOMEM;
@@ -379,16 +406,6 @@ static int is31fl319x_probe(struct i2c_client *client,
goto free_mutex;
}

- /*
- * Kernel conventions require per-LED led-max-microamp property.
- * But the chip does not allow to limit individual LEDs.
- * So we take minimum from all subnodes for safety of hardware.
- */
- for (i = 0; i < is31->cdef->num_leds; i++)
- if (is31->leds[i].configured &&
- is31->leds[i].max_microamp < aggregated_led_microamp)
- aggregated_led_microamp = is31->leds[i].max_microamp;
-
regmap_write(is31->regmap, IS31FL319X_CONFIG2,
is31fl319x_microamp_to_cs(dev, aggregated_led_microamp) |
is31fl319x_db_to_gain(is31->audio_gain_db));
--
2.26.2
\
 
 \ /
  Last update: 2020-09-18 00:34    [W:0.275 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site