lkml.org 
[lkml]   [2020]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 3/4] i2c: designware: Allow SMBus block reads up to 255 bytes in length
On Wed, Sep 16, 2020 at 10:22:55PM -0700, Sultan Alsawaf wrote:
> From: Sultan Alsawaf <sultan@kerneltoast.com>
>
> According to the SMBus 3.0 protocol specification, block transfer limits
> were increased from 32 bytes to 255 bytes. Remove the obsolete 32-byte
> limitation.

Sadly, it is not that easy. We are trying to extend BLOCK_MAX to 255
(SMBus 3 specs) but there are various things to be considered,
especially with buffers and when passing it to userspace. Check here for
the discussion (and you are welcome to join, of course):

http://patchwork.ozlabs.org/project/linux-i2c/list/?submitter=79741&state=*

>
> Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
> ---
> drivers/i2c/busses/i2c-designware-master.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
> index 22f28516bca7..5bd64bd17d94 100644
> --- a/drivers/i2c/busses/i2c-designware-master.c
> +++ b/drivers/i2c/busses/i2c-designware-master.c
> @@ -433,7 +433,7 @@ i2c_dw_read(struct dw_i2c_dev *dev)
> regmap_read(dev->map, DW_IC_DATA_CMD, &tmp);
> if (flags & I2C_M_RECV_LEN) {
> /* Ensure length byte is a valid value */
> - if (tmp <= I2C_SMBUS_BLOCK_MAX && tmp > 0)
> + if (tmp > 0)
> len = i2c_dw_recv_len(dev, tmp);
> else
> len = i2c_dw_recv_len(dev, len);
> --
> 2.28.0
>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-09-17 22:58    [W:0.148 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site