lkml.org 
[lkml]   [2020]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] dt-bindings: mfd: rohm,bd71837-pmic: Add common properties
Date
Add common properties appearing in DTSes (clock-names,
clock-output-names) with the common values (actually used in DTSes) to
fix dtbs_check warnings like:

arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dt.yaml:
pmic@4b: 'clock-names', 'clock-output-names', do not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Changes since v1:
1. Define the names, as used in existing DTS files.
---
.../devicetree/bindings/mfd/rohm,bd71837-pmic.yaml | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml
index 65018a019e1d..3bfdd33702ad 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml
@@ -32,9 +32,15 @@ properties:
clocks:
maxItems: 1

+ clock-names:
+ const: osc
+
"#clock-cells":
const: 0

+ clock-output-names:
+ const: pmic_clk
+
# The BD718x7 supports two different HW states as reset target states. States
# are called as SNVS and READY. At READY state all the PMIC power outputs go
# down and OTP is reload. At the SNVS state all other logic and external
--
2.17.1
\
 
 \ /
  Last update: 2020-09-17 22:06    [W:0.082 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site