lkml.org 
[lkml]   [2020]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 09/10] PCI/PME: Add pcie_walk_rcec() to RCEC PME handling
Date
The Root Complex Event Collectors(RCEC) appear as peers of Root Ports
and also have the PME capability. As with AER, there is a need to be
able to walk the RCiEPs associated with their RCEC for purposes of
acting upon them with callbacks. So add RCEC support through the use
of pcie_walk_rcec() to the current PME service driver and attach the
PME service driver to the RCEC device.

Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
drivers/pci/pcie/pme.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c
index 6a32970bb731..87799166c96a 100644
--- a/drivers/pci/pcie/pme.c
+++ b/drivers/pci/pcie/pme.c
@@ -310,7 +310,10 @@ static int pcie_pme_can_wakeup(struct pci_dev *dev, void *ign)
static void pcie_pme_mark_devices(struct pci_dev *port)
{
pcie_pme_can_wakeup(port, NULL);
- if (port->subordinate)
+
+ if (pci_pcie_type(port) == PCI_EXP_TYPE_RC_EC)
+ pcie_walk_rcec(port, pcie_pme_can_wakeup, NULL);
+ else if (port->subordinate)
pci_walk_bus(port->subordinate, pcie_pme_can_wakeup, NULL);
}

@@ -320,10 +323,15 @@ static void pcie_pme_mark_devices(struct pci_dev *port)
*/
static int pcie_pme_probe(struct pcie_device *srv)
{
- struct pci_dev *port;
+ struct pci_dev *port = srv->port;
struct pcie_pme_service_data *data;
int ret;

+ /* Limit to Root Ports or Root Complex Event Collectors */
+ if ((pci_pcie_type(port) != PCI_EXP_TYPE_RC_EC) &&
+ (pci_pcie_type(port) != PCI_EXP_TYPE_ROOT_PORT))
+ return -ENODEV;
+
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
@@ -333,7 +341,6 @@ static int pcie_pme_probe(struct pcie_device *srv)
data->srv = srv;
set_service_data(srv, data);

- port = srv->port;
pcie_pme_interrupt_enable(port, false);
pcie_clear_root_pme_status(port);

@@ -445,7 +452,7 @@ static void pcie_pme_remove(struct pcie_device *srv)

static struct pcie_port_service_driver pcie_pme_driver = {
.name = "pcie_pme",
- .port_type = PCI_EXP_TYPE_ROOT_PORT,
+ .port_type = PCIE_ANY_PORT,
.service = PCIE_PORT_SERVICE_PME,

.probe = pcie_pme_probe,
--
2.28.0
\
 
 \ /
  Last update: 2020-09-17 20:51    [W:1.902 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site