lkml.org 
[lkml]   [2020]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/5] dt-bindings: phy: qcom,qmp: Document SM8250 PCIe PHY bindings
On 16-09-20, 17:45, Bjorn Andersson wrote:
> On Wed 16 Sep 08:19 CDT 2020, Manivannan Sadhasivam wrote:
>
> > Document the DT bindings of below PCIe PHY versions used on SM8250:
> >
> > QMP GEN3x1 PHY - 1 lane
> > QMP GEN3x2 PHY - 2 lanes
> > QMP Modem PHY - 2 lanes
>
> How about something like "Add the three PCIe PHYs found in SM8250 to the
> QMP binding"?

Or add just one compatible sm8250-qmp-pcie and then use number of lanes
as dt property?

>
> >
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> > Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 5 +++++
> > 1 file changed, 5 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> > index 185cdea9cf81..69b67f79075c 100644
> > --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> > +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> > @@ -31,6 +31,9 @@ properties:
> > - qcom,sdm845-qmp-usb3-uni-phy
> > - qcom,sm8150-qmp-ufs-phy
> > - qcom,sm8250-qmp-ufs-phy
> > + - qcom,qcom,sm8250-qmp-gen3x1-pcie-phy
> > + - qcom,qcom,sm8250-qmp-gen3x2-pcie-phy
> > + - qcom,qcom,sm8250-qmp-modem-pcie-phy
>
> One "qcom," should be enough.
>
> >
> > reg:
> > items:
> > @@ -259,6 +262,8 @@ allOf:
> > enum:
> > - qcom,sdm845-qhp-pcie-phy
> > - qcom,sdm845-qmp-pcie-phy
> > + - qcom,sm8250-qhp-pcie-phy
> > + - qcom,sm8250-qmp-pcie-phy
>
> Adjust these.
>
> Regards,
> Bjorn
>
> > then:
> > properties:
> > clocks:
> > --
> > 2.17.1
> >

--
~Vinod

\
 
 \ /
  Last update: 2020-09-17 06:33    [W:0.055 / U:1.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site