lkml.org 
[lkml]   [2020]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 3/3] dt-bindings: leds: Convert pwm to yaml
On Fri, Sep 11, 2020 at 05:40:04PM +0200, Alexander Dahl wrote:
> The example was adapted slightly to make use of the 'function' and
> 'color' properties. License discussed with the original author.
>
> Suggested-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
> Signed-off-by: Alexander Dahl <post@lespocky.de>
> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
> ---
>
> Notes:
> v3 -> v4:
> * added Cc to original author of the binding
>
> v2 -> v3:
> * changed license identifier to recommended one
> * added Acked-by
>
> v2:
> * added this patch to series (Suggested-by: Jacek Anaszewski)
>
> .../devicetree/bindings/leds/leds-pwm.txt | 50 -----------
> .../devicetree/bindings/leds/leds-pwm.yaml | 85 +++++++++++++++++++
> 2 files changed, 85 insertions(+), 50 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/leds/leds-pwm.txt
> create mode 100644 Documentation/devicetree/bindings/leds/leds-pwm.yaml
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.txt b/Documentation/devicetree/bindings/leds/leds-pwm.txt
> deleted file mode 100644
> index 6c6583c35f2f..000000000000
> --- a/Documentation/devicetree/bindings/leds/leds-pwm.txt
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -LED connected to PWM
> -
> -Required properties:
> -- compatible : should be "pwm-leds".
> -
> -Each LED is represented as a sub-node of the pwm-leds device. Each
> -node's name represents the name of the corresponding LED.
> -
> -LED sub-node properties:
> -- pwms : PWM property to point to the PWM device (phandle)/port (id) and to
> - specify the period time to be used: <&phandle id period_ns>;
> -- pwm-names : (optional) Name to be used by the PWM subsystem for the PWM device
> - For the pwms and pwm-names property please refer to:
> - Documentation/devicetree/bindings/pwm/pwm.txt
> -- max-brightness : Maximum brightness possible for the LED
> -- active-low : (optional) For PWMs where the LED is wired to supply
> - rather than ground.
> -- label : (optional)
> - see Documentation/devicetree/bindings/leds/common.txt
> -- linux,default-trigger : (optional)
> - see Documentation/devicetree/bindings/leds/common.txt
> -
> -Example:
> -
> -twl_pwm: pwm {
> - /* provides two PWMs (id 0, 1 for PWM1 and PWM2) */
> - compatible = "ti,twl6030-pwm";
> - #pwm-cells = <2>;
> -};
> -
> -twl_pwmled: pwmled {
> - /* provides one PWM (id 0 for Charing indicator LED) */
> - compatible = "ti,twl6030-pwmled";
> - #pwm-cells = <2>;
> -};
> -
> -pwmleds {
> - compatible = "pwm-leds";
> - kpad {
> - label = "omap4::keypad";
> - pwms = <&twl_pwm 0 7812500>;
> - max-brightness = <127>;
> - };
> -
> - charging {
> - label = "omap4:green:chrg";
> - pwms = <&twl_pwmled 0 7812500>;
> - max-brightness = <255>;
> - };
> -};
> diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.yaml b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
> new file mode 100644
> index 000000000000..c74867492424
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
> @@ -0,0 +1,85 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/leds-pwm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: LEDs connected to PWM
> +
> +maintainers:
> + - Pavel Machek <pavel@ucw.cz>
> +
> +description:
> + Each LED is represented as a sub-node of the pwm-leds device. Each
> + node's name represents the name of the corresponding LED.
> +
> +properties:
> + compatible:
> + const: pwm-leds
> +
> +patternProperties:
> + "^pwm-led-([0-9a-f])$":

'^led-([0-9a-f])' would be my preference. A bit more on that below.

What about a single child case?

> + type: object
> +
> + $ref: common.yaml#
> +
> + properties:
> + pwms:
> + description:
> + "PWM property to point to the PWM device (phandle)/port (id)
> + and to specify the period time to be used:
> + <&phandle id period_ns>;"

No need to redefine a common property.

What is needed is how many pwms? I'd assume 1 only: 'maxItems: 1'

> +
> + pwm-names:
> + description:
> + "Name to be used by the PWM subsystem for the PWM device For
> + the pwms and pwm-names property please refer to:
> + Documentation/devicetree/bindings/pwm/pwm.txt"

Same here.

> +
> + max-brightness:
> + description:
> + Maximum brightness possible for the LED

Needs a type $ref.

> +
> + active-low:
> + description:
> + For PWMs where the LED is wired to supply rather than ground.

type: boolean

> +
> + required:
> + - pwms
> + - max-brightness

additionalProperties: false

That will cause errors if child node names were not consistent (no one
checked, so they won't be). We could just allow anything, but I prefer
to move things to be consistent yet try to capture any existing pattern.

> +
> +examples:
> + - |
> +
> + #include <dt-bindings/leds/common.h>
> +
> + twl_pwm: pwm {
> + /* provides two PWMs (id 0, 1 for PWM1 and PWM2) */
> + compatible = "ti,twl6030-pwm";
> + #pwm-cells = <2>;
> + };
> +
> + twl_pwmled: pwmled {
> + /* provides one PWM (id 0 for Charing indicator LED) */
> + compatible = "ti,twl6030-pwmled";
> + #pwm-cells = <2>;
> + };
> +
> + pwm_leds {
> + compatible = "pwm-leds";
> +
> + pwm-led-1 {
> + label = "omap4::keypad";
> + pwms = <&twl_pwm 0 7812500>;
> + max-brightness = <127>;
> + };
> +
> + pwm-led-2 {
> + color = <LED_COLOR_ID_GREEN>;
> + function = LED_FUNCTION_CHARGING;
> + pwms = <&twl_pwmled 0 7812500>;
> + max-brightness = <255>;
> + };
> + };
> +
> +...
> --
> 2.20.1
>

\
 
 \ /
  Last update: 2020-09-15 22:40    [W:0.618 / U:1.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site