lkml.org 
[lkml]   [2020]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH: 1/2] gpio: tc35894: fix up tc35894 interrupt configuration
On Mon, Aug 31, 2020 at 9:14 AM <dillon.minfei@gmail.com> wrote:
>
> From: dillon min <dillon.minfei@gmail.com>
>
> The offset of regmap is incorrect, j * 8 is move to the
> wrong register.
>
> for example:
>
> asume i = 0, j = 1. we want to set KPY5 as interrupt
> falling edge mode, regmap[0][1] should be TC3589x_GPIOIBE1 0xcd
> but, regmap[i] + j * 8 = TC3589x_GPIOIBE0 + 8 ,point to 0xd4,
> this is TC3589x_GPIOIE2 not TC3589x_GPIOIBE1.
>
> Fixes: c103de240439 ("gpio: reorganize drivers")
> Signed-off-by: dillon min <dillon.minfei@gmail.com>
> ---
> drivers/gpio/gpio-tc3589x.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpio/gpio-tc3589x.c b/drivers/gpio/gpio-tc3589x.c
> index 58b0da9eb76f..ea3f68a28fea 100644
> --- a/drivers/gpio/gpio-tc3589x.c
> +++ b/drivers/gpio/gpio-tc3589x.c
> @@ -212,7 +212,7 @@ static void tc3589x_gpio_irq_sync_unlock(struct irq_data *d)
> continue;
>
> tc3589x_gpio->oldregs[i][j] = new;
> - tc3589x_reg_write(tc3589x, regmap[i] + j * 8, new);
> + tc3589x_reg_write(tc3589x, regmap[i] + j, new);
> }
> }
>
> --
> 2.7.4
>

I suppose this patch may be correct but I don't see how commit
c103de240439 ("gpio: reorganize drivers") could be the culprit. It's
been like this since the original driver implementation from commit
d88b25be3584 ("gpio: Add TC35892 GPIO driver").

It's been over a decade since this driver was merged and nobody ever
reported this. Either nobody ever used the GPIO module with interrupts
(unless the bug's impact is not significant) for this chip or this is
a quirk of some specific model you're using. Could you double-check
this?

Bartosz

\
 
 \ /
  Last update: 2020-09-01 17:51    [W:0.066 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site