lkml.org 
[lkml]   [2020]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2 resend] iio:temperature:mlx90632: Adding extended calibration option
On Fri, 7 Aug 2020 at 13:13, Crt Mori <cmo@melexis.com> wrote:
>
> On Fri, 7 Aug 2020 at 12:29, Andy Shevchenko <andy.shevchenko@gmail.com> wrote:
> >
> > On Fri, Aug 7, 2020 at 12:21 PM Crt Mori <cmo@melexis.com> wrote:
> >
> > Oh yeah, you are right, there will be some comments :-)
> >
>
> Told ya. No matter how many times I go through it, I always find
> something. I will prepare v3 with fixes, except for some additional
> questions below.
>
I tried some suggestions and it was just not working. See the
explanation below. I am resending v3 without those.

> > > For some time market wants medical grade accuracy in medical range,
> >
> > the market
> >
> > > while still retaining the declared accuracy outside of the medical range
> > > within the same sensor. That is why we created extended calibration
> > > which is automatically switched to when object temperature is too high.
> > >
> > > This patch also introduces the object_ambient_temperature variable which
> > > is needed for more accurate calculation of the object infra-red
> > > footprint as sensor's ambient temperature might be totally different
> > > than what the ambient temperature is at object and that is why we can
> > > have some more error which can be eliminated. Currently this temperature
> >
> > errors
> >
> > > is fixed at 25, but interface to adjust it by user (with external sensor
> >
> > the interface
> >
> > > or just IR measurement of the another object which acts as ambient),
> >
> > 'of another' or 'the other' if we know what it is exactly.
> >
> > > will be introduced in another commit.
> >
> > ...
> >
> > > struct mlx90632_data {
> > > struct i2c_client *client;
> > > struct mutex lock; /* Multiple reads for single measurement */
> > > struct regmap *regmap;
> > > u16 emissivity;
> >
> > > + u8 mtyp; /* measurement type - to enable extended range calculations */
> >
> > Perhaps better to switch this struct to follow kernel doc in one of
> > preparatory patches and add the description of this field accordingly.
> >
>
> Can you explain a bit more? I was looking in kernel doc, but could not
> find much about how to comment these members.
>
> > > + u32 object_ambient_temperature;
> > > };
> >
> > ...
> >
> > > +static int mlx90632_set_meas_type(struct regmap *regmap, u8 type)
> > > +{
> > > + int ret;
> > > +
> > > + if ((type != MLX90632_MTYP_MEDICAL) & (type != MLX90632_MTYP_EXTENDED))
> > > + return -EINVAL;
> >
> > Not sure I understand the point of & vs. && here.
> >
>
> Should indeed be &&, if it is needed at all. Both are boolean types.
>
> > > + ret = regmap_write(regmap, MLX90632_REG_I2C_CMD, MLX90632_RESET_CMD);
> > > + if (ret < 0)
> > > + return ret;
> > > +
> > > + ret = regmap_write_bits(regmap, MLX90632_REG_CONTROL,
> > > + (MLX90632_CFG_MTYP_MASK | MLX90632_CFG_PWR_MASK),
> > > + (MLX90632_MTYP_STATUS(type) | MLX90632_PWR_STATUS_HALT));
> > > + if (ret < 0)
> > > + return ret;
> > > +
> > > + mlx90632_pwr_continuous(regmap);
> >
> > > +
> > > + return ret;
> >
> > Since you are using ' < 0' above and below (and I think it doesn't
> > worth it, i.o.w. you may drop them) here is something interesting
> > might be returned (actually not, see first part of this sentence).
> > Should be
> >
> > return 0;
> >
> > > +}
> >
> > ...
> >
> > > +static int mlx90632_read_ambient_raw_extended(struct regmap *regmap,
> > > + s16 *ambient_new_raw, s16 *ambient_old_raw)
> > > +{
> >
> > > + int ret;
> > > + unsigned int read_tmp;
> >
> > Please keep them in reversed xmas tree format.
> >
> > > +
> > > + ret = regmap_read(regmap, MLX90632_RAM_3(17), &read_tmp);
> > > + if (ret < 0)
> > > + return ret;
> > > + *ambient_new_raw = (s16)read_tmp;
> > > +
> > > + ret = regmap_read(regmap, MLX90632_RAM_3(18), &read_tmp);
> > > + if (ret < 0)
> > > + return ret;
> > > + *ambient_old_raw = (s16)read_tmp;
> >
> > > + return ret;
> >
> > Same comments as per previous function.
> >
> > > +}
> >
> > > +static int mlx90632_read_object_raw_extended(struct regmap *regmap, s16 *object_new_raw)
> > > +{
> > > + int ret;
> > > + unsigned int read_tmp;
> > > + s32 read;
> >
> > Besides all above comments being applicable here...
> >
> > > + ret = regmap_read(regmap, MLX90632_RAM_1(17), &read_tmp);
> > > + if (ret < 0)
> > > + return ret;
> > > + read = (s16)read_tmp;
> > > +
> > > + ret = regmap_read(regmap, MLX90632_RAM_2(17), &read_tmp);
> > > + if (ret < 0)
> > > + return ret;
> > > + read = read - (s16)read_tmp;
> >
> > ...I'm wondering if you can use bulk reads of those registers.
>
> I cant, sensor does not support it and single read case did not work
> few years back, but maybe regmap now improved...
>
> > Also I'm not sure you need explicit castings.
> >
> > > + ret = regmap_read(regmap, MLX90632_RAM_1(18), &read_tmp);
> > > + if (ret < 0)
> > > + return ret;
> > > + read = read - (s16)read_tmp;
> > > +
> > > + ret = regmap_read(regmap, MLX90632_RAM_2(18), &read_tmp);
> > > + if (ret < 0)
> > > + return ret;
> > > + read = (read + (s16)read_tmp) / 2;
> >
> > Ditto.
> >
> > > + ret = regmap_read(regmap, MLX90632_RAM_1(19), &read_tmp);
> > > + if (ret < 0)
> > > + return ret;
> > > + read = read + (s16)read_tmp;
> > > +
> > > + ret = regmap_read(regmap, MLX90632_RAM_2(19), &read_tmp);
> > > + if (ret < 0)
> > > + return ret;
> > > + read = read + (s16)read_tmp;
> >
> > > + if (read > 32767 || read < -32768)
> >
> > These are defined as S16_MIN and S16_MAX. Use limits.h.
> >
> > > + return -EINVAL;
> >
> > -ERANGE
> >
> > > + *object_new_raw = (int16_t)read;
> >
> > Oh, no. Please avoid user space types in the kernel. And what's the
> > point anyway after checking the range?
> >
> > > + return ret;
> > > +}
> >
> > ...
> >
> > > +static int mlx90632_read_all_channel_extended(struct mlx90632_data *data, s16 *object_new_raw,
> > > + s16 *ambient_new_raw, s16 *ambient_old_raw)
> > > +{
> > > + s32 ret;
> > > + int tries = 4;
> > > +
> > > + mutex_lock(&data->lock);
> > > + ret = mlx90632_set_meas_type(data->regmap, MLX90632_MTYP_EXTENDED);
> > > + if (ret < 0)
> > > + goto read_unlock;
> >
> >
> > > + while (tries-- > 0) {
> > > + ret = mlx90632_perform_measurement(data);
> > > + if (ret < 0)
> > > + goto read_unlock;
> > > +
> >
> > > + if (ret == 19)
> >
> > It's funny. What does this magic mean?
> >
>
> That we should break the loop once channels up to 19 are filled (we
> read 17 18 and 19 in this case, we read 1 2 in normal case). A comment
> maybe here?
>
> > > + break;
> > > + }
> > > + if (tries < 0) {
> > > + ret = -ETIMEDOUT;
> > > + goto read_unlock;
> > > + }
> >
> > Timeout loops are much better in a following style
> >
> > unsigned int iterations = 4;
> >
> > do {
> > ...
> > } while (--iterations);
> > if (!iterations) {
> > ...-ETIMEDOUT...
> > }
> >
> > Besides that consider the iopoll.h APIs, perhaps it may be applied here.
> >

I tried to apply the iopoll.h, but it is not appropriate enough as
timeout_us would have to be timeout_ms, because if you want 4 cycles
of 10ms, then you run out of range of usleep. I can create a helper,
but it does not seem like someone needs it. I am keeping current
style, because also function above (old) has the same style of poll
loop.

> > > + ret = mlx90632_read_object_raw_extended(data->regmap, object_new_raw);
> > > + if (ret < 0)
> > > + goto read_unlock;
> > > +
> > > + ret = mlx90632_read_ambient_raw_extended(data->regmap, ambient_new_raw, ambient_old_raw);
> > > +
> > > +read_unlock:
> > > + (void) mlx90632_set_meas_type(data->regmap, MLX90632_MTYP_MEDICAL);
> > > +
> > > + mutex_unlock(&data->lock);
> > > + return ret;
> > > +}
> >
> > ...
> >
> > > +static s64 mlx90632_preprocess_temp_obj_extended(s16 object_new_raw, s16 ambient_new_raw,
> > > + s16 ambient_old_raw, s16 Ka)
> > > +{
> > > + s64 VR_IR, kKa, tmp;
> > > +
> > > + kKa = ((s64)Ka * 1000LL) >> 10ULL;
> > > + VR_IR = (s64)ambient_old_raw * 1000000LL +
> > > + kKa * div64_s64(((s64)ambient_new_raw * 1000LL),
> > > + (MLX90632_REF_3));
> >
> > And the point of using parentheses? It's not a Lisp language :-)
> > (Applicable everywhere in your code, the rule of thumb that any
> > particular comment given by reviewer should be considered against
> > entire code where it's appropriate)
> >
> > > + tmp = div64_s64(
> > > + div64_s64((((s64)object_new_raw) * 1000000000000LL), MLX90632_REF_12),
> > > + VR_IR);
> > > + return div64_s64((tmp << 19ULL), 1000LL);
> > > +}
> >
> > ...
> >
> > > + TAdut = div64_s64(((ambient - kTA0) * 1000000LL), kTA) + 25 * 1000000LL;
> > > + Tr4 = (div64_long(reflected, 10) + 27315) *
> > > + (div64_long(reflected, 10) + 27315) *
> > > + (div64_long(reflected, 10) + 27315) *
> > > + (div64_long(reflected, 10) + 27315);
> > > + TAdut4 = (div64_s64(TAdut, 10000LL) + 27315) *
> > > + (div64_s64(TAdut, 10000LL) + 27315) *
> > > + (div64_s64(TAdut, 10000LL) + 27315) *
> > > + (div64_s64(TAdut, 10000LL) + 27315);
> >
> > Okay, looking at this I definitely think that this patch should be
> > split into a few smaller logically separated pieces like introducing
> > some helpers to calculate above with them.
> >
> > ...
> >
> > > + mlx90632->object_ambient_temperature = 25000; /* 25 degrees Celsius */
> >
> > Comment is lying. milliCelsius.
> >
> > --
> > With Best Regards,
> > Andy Shevchenko

\
 
 \ /
  Last update: 2020-08-08 01:02    [W:0.058 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site