lkml.org 
[lkml]   [2020]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 00/13] MIPS: Convert Ingenic to a generic board
From
Date
Hi Paul,

I'm not too sure if remove "cpu-feature-overrides.h" will cause some
problems for X2000, because according to my current test on X2000, I
found that it is somewhat different from the SoCs using XBurst1 CPU
core, with the kernel source code provided by Ingenic, for example, we
must configure "#define cpu_has_tlbinv 1" in "cpu-feature-overrides.h"
to make the X2000 work normally, otherwise the kernel will get stuck.
And X2000's interrupt controller has also been redesigned. If these
differences make it impossible to share code, should we set a
subdirectory of "xburst" and "xburst2" in "arch/mips/ingenic"? (I am
just worried about this situation, so far I have not been able to
successfully run the mainline kernel on X2000).

I have added some related engineers from Ingenic to CC

Thanks and best regards!

在 2020/8/4 上午1:01, Paul Cercueil 写道:
> Hi Thomas & list,
>
> Here is a set of patches for 5.10 (no rush) to move Ingenic support from
> arch/mips/jz4740/ to arch/mips/generic/.
>
> There are some Kconfig changes that I think should be reviewed in detail
> to avoid breakages elsewhere. The idea behind these changes is to allow
> the Ingenic "generic" code to be built in a non-generic kernel, since
> generic kernels bring lots of dependencies which result in a +7% size
> increase.
>
> Support for booting the generic kernel with a built-in and/or appended
> devicetree, as well as support for compressed (vmlinuz) kernels, has
> been added as well.
>
> Cheers,
> -Paul
>
> Paul Cercueil (13):
> MIPS: cpu-probe: Set Ingenic's writecombine to _CACHE_CACHABLE_WA
> MIPS: cpu-probe: Mark XBurst CPU as having vtagged caches
> MIPS: cpu-probe: ingenic: Fix broken BUG_ON
> MIPS: Kconfig: add MIPS_GENERIC_KERNEL symbol
> MIPS: machine: Add get_system_type callback
> MIPS: generic: Call the machine's .get_system_type callback if
> provided
> MIPS: generic: Support booting with built-in or appended DTB
> MIPS: generic: Add support for zboot
> MIPS: generic: Increase NR_IRQS to 256
> MIPS: generic: Add support for Ingenic SoCs
> MIPS: jz4740: Drop folder
> MIPS: configs: Regenerate configs of Ingenic boards
> MAINTAINERS: Update paths to Ingenic platform code
>
> MAINTAINERS | 4 +-
> arch/mips/Kbuild.platforms | 1 -
> arch/mips/Kconfig | 43 ++++--
> arch/mips/configs/ci20_defconfig | 4 +-
> arch/mips/configs/cu1000-neo_defconfig | 16 +-
> arch/mips/configs/gcw0_defconfig | 2 +-
> arch/mips/configs/qi_lb60_defconfig | 5 +-
> arch/mips/configs/rs90_defconfig | 4 +-
> arch/mips/generic/Kconfig | 8 +-
> arch/mips/generic/Makefile | 2 +-
> arch/mips/generic/Platform | 1 +
> arch/mips/generic/board-ingenic.c | 108 +++++++++++++
> arch/mips/generic/init.c | 28 +++-
> arch/mips/generic/proc.c | 25 ---
> arch/mips/include/asm/mach-generic/irq.h | 2 +-
> .../asm/mach-jz4740/cpu-feature-overrides.h | 50 ------
> arch/mips/include/asm/mach-jz4740/irq.h | 13 --
> arch/mips/include/asm/machine.h | 1 +
> arch/mips/include/asm/pgtable-bits.h | 5 -
> arch/mips/{jz4740 => ingenic}/Kconfig | 16 +-
> arch/mips/jz4740/Makefile | 9 --
> arch/mips/jz4740/Platform | 3 -
> arch/mips/jz4740/setup.c | 145 ------------------
> arch/mips/kernel/cpu-probe.c | 8 +-
> 24 files changed, 198 insertions(+), 305 deletions(-)
> create mode 100644 arch/mips/generic/board-ingenic.c
> delete mode 100644 arch/mips/generic/proc.c
> delete mode 100644 arch/mips/include/asm/mach-jz4740/cpu-feature-overrides.h
> delete mode 100644 arch/mips/include/asm/mach-jz4740/irq.h
> rename arch/mips/{jz4740 => ingenic}/Kconfig (91%)
> delete mode 100644 arch/mips/jz4740/Makefile
> delete mode 100644 arch/mips/jz4740/Platform
> delete mode 100644 arch/mips/jz4740/setup.c
>

\
 
 \ /
  Last update: 2020-08-07 18:24    [W:0.173 / U:2.652 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site