lkml.org 
[lkml]   [2020]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net 0/4] support multipacket broadcast message
On Fri, Aug 07, 2020 at 05:36:38PM +0800, Zhang Changzhong wrote:
> Hi Oleksij,
>
> We have tested this j1939 stack according to SAE J1939-21. It works fine for
> most cases, but when we test multipacket broadcast message function we found
> the receiver can't receive those packets.
>
> You can reproduce on CAN bus or vcan, for vcan case use cangw to connect vcan0
> and vcan1:
> sudo cangw -A -s vcan0 -d vcan1 -e
> sudo cangw -A -s vcan1 -d vcan0 -e
>
> To reproduce it use following commands:
> testj1939 -B -r vcan1:0x90 &
> testj1939 -B -s20 vcan0:0x80 :,0x12300
>
> Besides, candump receives correct packets while testj1939 receives nothing.

Ok, thank you!

i'm able to reproduce it and added following test:
https://github.com/linux-can/can-tests/blob/master/j1939/j1939_ac_1k_bam_local0.sh

--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-08-07 15:17    [W:1.212 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site