lkml.org 
[lkml]   [2020]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 20/20] arm64: dts: renesas: r8a774e1: Add VIN and CSI-2 nodes
Hi Geert, Lad,

On 2020-08-06 13:47:58 +0200, Geert Uytterhoeven wrote:
> Hi Prabhakar,
>
> On Thu, Aug 6, 2020 at 1:17 PM Lad, Prabhakar
> <prabhakar.csengg@gmail.com> wrote:
> > On Wed, Aug 5, 2020 at 12:19 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> > > On Thu, Jul 16, 2020 at 7:20 PM Lad Prabhakar
> > > <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> > > > Add VIN and CSI-2 nodes to RZ/G2H (R8A774E1) SoC dtsi.
> > > >
> > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > > > Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
> > >
> > > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> > >
> > > However, before I queue this in renesas-devel for v5.10, I'd like to
> > > have some clarification about the issue below.
> > >
> > > > --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
> > > > +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
> > >
> > > > + vin4: video@e6ef4000 {
> > > > + compatible = "renesas,vin-r8a774e1";
> > > > + reg = <0 0xe6ef4000 0 0x1000>;
> > > > + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
> > > > + clocks = <&cpg CPG_MOD 807>;
> > > > + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
> > > > + resets = <&cpg 807>;
> > > > + renesas,id = <4>;
> > > > + status = "disabled";
> > > > +
> > > > + ports {
> > > > + #address-cells = <1>;
> > > > + #size-cells = <0>;
> > > > +
> > > > + port@1 {
> > > > + #address-cells = <1>;
> > > > + #size-cells = <0>;
> > >
> > > "make dtbs W=1" says:
> > >
> > > arch/arm64/boot/dts/renesas/r8a774e1.dtsi:1562.12-1572.7: Warning
> > > (graph_child_address): /soc/video@e6ef4000/ports/port@1: graph node
> > > has single child node 'endpoint@0', #address-cells/#size-cells are not
> > > necessary
> > >
> > > (same for vin5-7 below)
> > >
> > Referring to commit 5e53dbf4edb4d ("arm64: dts: renesas: r8a77990: Fix
> > VIN endpoint numbering") we definitely need endpoint numbering.
> > Probably the driver needs to be fixed to handle such cases.
>
> > > > +
> > > > + reg = <1>;
> > > > +
> > > > + vin4csi20: endpoint@0 {
> > > > + reg = <0>;
> > > > + remote-endpoint = <&csi20vin4>;
>
> On R-Car E3, the single endpoint is at address 2, so "make dtbs W=1"doesn't
> complain. Here it is at address 0.
>
> Niklas?

First the R-Car VIN driver makes decisions based on which endpoint is
described, each endpoint 0-3 represents a different CSI-2 block on the
other end (0: CSI20, 1: CSI21, 2: CSI40 and 3: CSI41).

Then how to handle the warning I'm not sure. I can only really see 2
options.

1. Ignore the warning.
2. Remove #address-cells, #size-cells and reg properties from port@ if
the only endpoint described is endpoint@0.

I would prefers option 2. that is what we do in other cases (for example
on Gen2 boards that only have a single parallel sensor in some early DTS
files we don't have the ports node and just describe a single port with
the same reasoning.

We are not at risk at someone describing a second CSI-2 bock as an
overlay so I see no real harm in option 2. What are your thoughts Geert?
You know more about DT then me.

>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds

--
Regards,
Niklas Söderlund

\
 
 \ /
  Last update: 2020-08-07 13:28    [W:0.101 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site