lkml.org 
[lkml]   [2020]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] iio: imu: adis16480: Add support for burst read function
On Tue, 4 Aug 2020 13:04:13 +0300
Alexandru Ardelean <alexandru.ardelean@analog.com> wrote:

> From: Stefan Popa <stefan.popa@analog.com>
>
> The burst read function (BRF) provides a method for reading a batch of
> data (status, temperature, gyroscopes, accelerometers, timestamp/data
> counter and CRC code), which does not require a stall time between each
> 16-bit sgment and only requires on command on the DIN line to initiate.
>
> The BRF contains either 19 or 20 different data segments of 16-bits
> each. After making the burst request, the response can have one or two
> "don't care" 16-bit responses before the BURST_ID. This is why the
> received burst sequence needs to be followed until the BURST_ID is
> detected, which indicates that the data will be contained in the
> following 17 segments of 16-bits each. Temperature is the first data
> channel in the sequence.
>
> Currently, the burst function is activated by default for all devices
> that support it. A future patch will offer the option to enable/disable
> this feature from userspace.
That is problematic if you mean an explicit control. We considered that
for similar cases in the past, and ruled it out as an interface that
is hard for userspace to know what to do with it.

As such, best option is to try and estimate whether it will help for
a given set of channels. If it doesn't then don't use it :)

A few comments inline to add to Andy's ones.

Thanks,

Jonathan

>
> Also, the CRC code is not checked. This will be added in a future patch
> as well.
>
> Signed-off-by: Stefan Popa <stefan.popa@analog.com>
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
> ---
> drivers/iio/imu/adis16480.c | 106 +++++++++++++++++++++++++++++++++++-
> 1 file changed, 105 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/iio/imu/adis16480.c b/drivers/iio/imu/adis16480.c
> index 1eb4f98076f1..9b100c8fb744 100644
> --- a/drivers/iio/imu/adis16480.c
> +++ b/drivers/iio/imu/adis16480.c
> @@ -23,6 +23,9 @@
> #include <linux/iio/buffer.h>
> #include <linux/iio/imu/adis.h>
>
> +#include <linux/iio/triggered_buffer.h>
> +#include <linux/iio/trigger_consumer.h>
> +
> #include <linux/debugfs.h>
>
> #define ADIS16480_PAGE_SIZE 0x80
> @@ -101,6 +104,9 @@
> * Available only for ADIS1649x devices
> */
> #define ADIS16495_REG_SYNC_SCALE ADIS16480_REG(0x03, 0x10)
> +#define ADIS16495_REG_BURST_CMD ADIS16480_REG(0x00, 0x7C)
> +#define ADIS16495_BURST_ID 0xA5A5
> +#define ADIS16495_BURST_MAX_DATA 20
>
> #define ADIS16480_REG_SERIAL_NUM ADIS16480_REG(0x04, 0x20)
>
> @@ -138,6 +144,7 @@ struct adis16480_chip_info {
> unsigned int max_dec_rate;
> const unsigned int *filter_freqs;
> bool has_pps_clk_mode;
> + struct adis_burst *burst;
> const struct adis_data adis_data;
> };
>
> @@ -163,6 +170,20 @@ struct adis16480 {
> unsigned int clk_freq;
> };
>
> +static struct adis_burst adis16495_burst = {
> + .en = true,
> + .reg_cmd = ADIS16495_REG_BURST_CMD,
> + /*
> + * adis_update_scan_mode_burst() sets the burst length in respect with
> + * the number of channels and allocates 16 bits for each. However, for
> + * adis1649x devices, the data for each channel is composed of a 16-bit
> + * low and 16-bit high part. Besides this, the burst sequence contains
> + * data for BURST_ID, SYS_E_FLAG, TIME_STAMP, CRC_LWR, CRC_UPR, one or
> + * two don't care segments.
> + */
> + .extra_len = 12 * sizeof(u16),
> +};
> +
> static const char * const adis16480_int_pin_names[4] = {
> [ADIS16480_PIN_DIO1] = "DIO1",
> [ADIS16480_PIN_DIO2] = "DIO2",
> @@ -953,6 +974,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
> .max_dec_rate = 4250,
> .filter_freqs = adis16495_def_filter_freqs,
> .has_pps_clk_mode = true,
> + .burst = &adis16495_burst,
> .adis_data = ADIS16480_DATA(16495, &adis16495_1_timeouts),
> },
> [ADIS16495_2] = {
> @@ -967,6 +989,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
> .max_dec_rate = 4250,
> .filter_freqs = adis16495_def_filter_freqs,
> .has_pps_clk_mode = true,
> + .burst = &adis16495_burst,
> .adis_data = ADIS16480_DATA(16495, &adis16495_1_timeouts),
> },
> [ADIS16495_3] = {
> @@ -981,6 +1004,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
> .max_dec_rate = 4250,
> .filter_freqs = adis16495_def_filter_freqs,
> .has_pps_clk_mode = true,
> + .burst = &adis16495_burst,
> .adis_data = ADIS16480_DATA(16495, &adis16495_1_timeouts),
> },
> [ADIS16497_1] = {
> @@ -995,6 +1019,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
> .max_dec_rate = 4250,
> .filter_freqs = adis16495_def_filter_freqs,
> .has_pps_clk_mode = true,
> + .burst = &adis16495_burst,
> .adis_data = ADIS16480_DATA(16497, &adis16495_1_timeouts),
> },
> [ADIS16497_2] = {
> @@ -1009,6 +1034,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
> .max_dec_rate = 4250,
> .filter_freqs = adis16495_def_filter_freqs,
> .has_pps_clk_mode = true,
> + .burst = &adis16495_burst,
> .adis_data = ADIS16480_DATA(16497, &adis16495_1_timeouts),
> },
> [ADIS16497_3] = {
> @@ -1023,10 +1049,81 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
> .max_dec_rate = 4250,
> .filter_freqs = adis16495_def_filter_freqs,
> .has_pps_clk_mode = true,
> + .burst = &adis16495_burst,
> .adis_data = ADIS16480_DATA(16497, &adis16495_1_timeouts),
> },
> };
>
> +static irqreturn_t adis16480_trigger_handler(int irq, void *p)
> +{
> + struct iio_poll_func *pf = p;
> + struct iio_dev *indio_dev = pf->indio_dev;
> + struct adis16480 *st = iio_priv(indio_dev);
> + struct adis *adis = &st->adis;
> + int ret, bit, offset, i = 0;
> + __be16 data[ADIS16495_BURST_MAX_DATA], *buffer, *d;
> +
> + if (!adis->buffer)
> + return -ENOMEM;
> +
> + mutex_lock(&adis->state_lock);
> + if (adis->current_page != 0) {
> + adis->tx[0] = ADIS_WRITE_REG(ADIS_REG_PAGE_ID);
> + adis->tx[1] = 0;
> + spi_write(adis->spi, adis->tx, 2);
> + }
> +
> + ret = spi_sync(adis->spi, &adis->msg);
> + if (ret)
> + dev_err(&adis->spi->dev, "Failed to read data: %d\n", ret);
> +
> + adis->current_page = 0;
> + mutex_unlock(&adis->state_lock);
> +
> + if (!(adis->burst && adis->burst->en)) {
> + buffer = adis->buffer;
> + goto push_to_buffers;
> + }
> + /*
> + * After making the burst request, the response can have one or two
> + * "don't care" 16-bit responses, before the BURST_ID.

That's nasty... :)

> + */
> + d = (__be16 *)adis->buffer;
> + for (offset = 0; offset < 3; offset++) {

If it's one or two, start at one!

> + if (d[offset] == ADIS16495_BURST_ID) {
> + offset += 2; /* TEMP_OUT */
> + break;
> + }
> + }
> +
> + for_each_set_bit(bit, indio_dev->active_scan_mask,
> + indio_dev->masklength) {
> + /*
> + * When burst mode is used, temperature is the first data
> + * channel in the sequence, but the temperature scan index
> + * is 10.
> + */
> + if (bit == ADIS16480_SCAN_TEMP) {
> + data[2 * i] = d[offset];
> + } else {
> + /* The lower register data is sequenced first */
> + data[2 * i] = d[2 * bit + offset + 2];
> + data[2 * i + 1] = d[2 * bit + offset + 1];
> + }
> + i++;
> + }

> +
> + buffer = data;
> +
> +push_to_buffers:
> + iio_push_to_buffers_with_timestamp(indio_dev, buffer,

This function requires the whole buffer to be aligned suitable for putting
an 8 byte timestamp in at a naturally aligned location. Basically
that means you have to mark buffer __aligned(8). There are lots
of broken cases of this in IIO and for most of them there have been
patches on the list.


> + pf->timestamp);
> +
> + iio_trigger_notify_done(indio_dev->trig);
> +
> + return IRQ_HANDLED;
> +}
> +
> static const struct iio_info adis16480_info = {
> .read_raw = &adis16480_read_raw,
> .write_raw = &adis16480_write_raw,
> @@ -1264,7 +1361,14 @@ static int adis16480_probe(struct spi_device *spi)
> st->clk_freq = st->chip_info->int_clk;
> }
>
> - ret = adis_setup_buffer_and_trigger(&st->adis, indio_dev, NULL);
> + /* If burst mode is supported, enable it by default */
> + if (st->chip_info->burst) {
> + st->adis.burst = st->chip_info->burst;
> + st->adis.burst_extra_len = st->chip_info->burst->extra_len;
> + }
> +
> + ret = adis_setup_buffer_and_trigger(&st->adis, indio_dev,
> + adis16480_trigger_handler);
> if (ret)
> goto error_clk_disable_unprepare;
>

\
 
 \ /
  Last update: 2020-08-06 20:00    [W:0.065 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site