lkml.org 
[lkml]   [2020]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 7/7] pwm: cros-ec: Simplify EC error handling
Date
With enhanced error reporting from cros_ec_cmd_xfer_status() in place,
we can fully use it and no longer rely on EC error codes.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/pwm/pwm-cros-ec.c | 26 ++++----------------------
1 file changed, 4 insertions(+), 22 deletions(-)

diff --git a/drivers/pwm/pwm-cros-ec.c b/drivers/pwm/pwm-cros-ec.c
index 94d3dff9b0e5..c1c337969e4e 100644
--- a/drivers/pwm/pwm-cros-ec.c
+++ b/drivers/pwm/pwm-cros-ec.c
@@ -81,8 +81,7 @@ static int cros_ec_pwm_set_duty(struct cros_ec_device *ec, u8 index, u16 duty)
return cros_ec_cmd_xfer_status(ec, msg);
}

-static int __cros_ec_pwm_get_duty(struct cros_ec_device *ec, u8 index,
- u32 *result)
+static int cros_ec_pwm_get_duty(struct cros_ec_device *ec, u8 index)
{
struct {
struct cros_ec_command msg;
@@ -107,19 +106,12 @@ static int __cros_ec_pwm_get_duty(struct cros_ec_device *ec, u8 index,
params->index = index;

ret = cros_ec_cmd_xfer_status(ec, msg);
- if (result)
- *result = msg->result;
if (ret < 0)
return ret;

return resp->duty;
}

-static int cros_ec_pwm_get_duty(struct cros_ec_device *ec, u8 index)
-{
- return __cros_ec_pwm_get_duty(ec, index, NULL);
-}
-
static int cros_ec_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
const struct pwm_state *state)
{
@@ -215,28 +207,18 @@ static int cros_ec_num_pwms(struct cros_ec_device *ec)

/* The index field is only 8 bits */
for (i = 0; i <= U8_MAX; i++) {
- u32 result = 0;
-
- ret = __cros_ec_pwm_get_duty(ec, i, &result);
+ ret = cros_ec_pwm_get_duty(ec, i);
/*
* We look for SUCCESS, INVALID_COMMAND, or INVALID_PARAM
* responses; everything else is treated as an error.
- * The EC error codes either map to -EOPNOTSUPP / -EINVAL,
- * or -EPROTO is returned and the EC error is in the result
- * field. Check for both.
+ * The EC error codes map to -EOPNOTSUPP and -EINVAL,
+ * so check for those.
*/
switch (ret) {
case -EOPNOTSUPP: /* invalid command */
return -ENODEV;
case -EINVAL: /* invalid parameter */
return i;
- case -EPROTO:
- /* Old or new error return code: Handle both */
- if (result == EC_RES_INVALID_COMMAND)
- return -ENODEV;
- else if (result == EC_RES_INVALID_PARAM)
- return i;
- return -EPROTO;
default:
if (ret < 0)
return ret;
--
2.17.1
\
 
 \ /
  Last update: 2020-08-06 18:55    [W:0.068 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site