lkml.org 
[lkml]   [2020]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v8 08/10] gpu: host1x: mipi: Keep MIPI clock enabled till calibration is done
From
Date
06.08.2020 19:41, Sowjanya Komatineni пишет:
...
>> What about to add 72us delay to the end of start_calibration() in order
>> to ensure that FSM is finished before LP-11?
>
> Why we should add 72uS in start_calibration() when can use same
> finish_calibration() for both pass/fail cases?
>
> Only timing loose we see is in case of failure we still wait for 250ms
> and as this is failing case I hope should be ok.
>

You said that calibration settings are applied to pads on LP-11, but if
LP-11 happens before FSM is finished, then what values will be applied
if any?

\
 
 \ /
  Last update: 2020-08-06 18:47    [W:0.107 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site