lkml.org 
[lkml]   [2020]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v6] cpufreq: intel_pstate: Implement passive mode with HWP enabled
Hi Doug,

On Tue, Aug 4, 2020 at 7:07 PM Doug Smythies <dsmythies@telus.net> wrote:
>
> Hi Rafael,
>
> I was just writing you about V5 when this V6 came.
>
> On 2020.08.04 08:11 Rafael J. Wysocki wrote:
> ...
> > This is on top of the material already in the mainline.
>
> Oh, should have read that part better,
> but did get there in the end.
> ...
> > v5 -> v6:
> > * Fix the problem with the EPP setting via sysfs not working with the
> > performance and powersave governors by stopping and restarting the
> > governor around the sysfs-based EPP updates in the passive mode.
> > * Because of that, use the epp_cached field just for avoiding the above
> > if the new EPP value for the given CPU is the same as the old one.
> > * Export cpufreq_start/stop_governor() from the core (for the above).
>
> EPP is still not right.
> I am not messing with it at all, just observing via my msr-decoder.

If you are not touching it, then it should not change in the passive mode.

> I booted without any intel_pstate related directives for the
> kernel command line. The below is as expected (performance gov.):

Note that the active mode performance scaling algorithm (which is not
the same as the performance cpufreq governor) sets the EPP to 0 for
all of the CPUs that it is used with and the driver sets the EPP to
255 in ->stop_cpu.

That last bit is questionable, but that's the active mode behavior
which is not changed by the $subject patch.

It would be more reasonable to restore the previous EPP when stopping
CPUs. Let me cut a v7 with that changed.

> # /home/doug/c/msr-decoder
> How many CPUs?: 6
> 8.) 0x198: IA32_PERF_STATUS : CPU 0-5 : 46 : 46 : 46 : 46 : 46 : 46 :
> B.) 0x770: IA32_PM_ENABLE: 1 : HWP enable
> 1.) 0x19C: IA32_THERM_STATUS: 88450000
> 2.) 0x1AA: MSR_MISC_PWR_MGMT: 401CC0 EIST enabled Coordination enabled OOB Bit 8 reset OOB Bit 18 reset
> 3.) 0x1B1: IA32_PACKAGE_THERM_STATUS: 88430000
> 4.) 0x64F: MSR_CORE_PERF_LIMIT_REASONS: 0
> A.) 0x1FC: MSR_POWER_CTL: 3C005D : C1E disable : EEO disable : RHO disable
> 5.) 0x771: IA32_HWP_CAPABILITIES (performance): 109252E : high 46 : guaranteed 37 : efficient 9 : lowest 1
> 6.) 0x774: IA32_HWP_REQUEST: CPU 0-5 :
> raw: 00002E2E : 00002E2E : 00002E2E : 00002E2E : 00002E2E : 00002E2E :
> min: 46 : 46 : 46 : 46 : 46 : 46 :
> max: 46 : 46 : 46 : 46 : 46 : 46 :
> des: 0 : 0 : 0 : 0 : 0 : 0 :
> epp: 0 : 0 : 0 : 0 : 0 : 0 :
> act: 0 : 0 : 0 : 0 : 0 : 0 :
> 7.) 0x777: IA32_HWP_STATUS: 4 : high 4 : guaranteed 0 : efficient 0 : lowest 0
>
> and then switched to passive mode later. EPP is not as expected. Expect 0
> (performance mode):
>
> # /home/doug/c/msr-decoder
> How many CPUs?: 6
> 8.) 0x198: IA32_PERF_STATUS : CPU 0-5 : 46 : 46 : 46 : 46 : 46 : 46 :
> B.) 0x770: IA32_PM_ENABLE: 1 : HWP enable
> 1.) 0x19C: IA32_THERM_STATUS: 88440000
> 2.) 0x1AA: MSR_MISC_PWR_MGMT: 401CC0 EIST enabled Coordination enabled OOB Bit 8 reset OOB Bit 18 reset
> 3.) 0x1B1: IA32_PACKAGE_THERM_STATUS: 88420000
> 4.) 0x64F: MSR_CORE_PERF_LIMIT_REASONS: 0
> A.) 0x1FC: MSR_POWER_CTL: 3C005D : C1E disable : EEO disable : RHO disable
> 5.) 0x771: IA32_HWP_CAPABILITIES (performance): 108252E : high 46 : guaranteed 37 : efficient 8 : lowest 1
> 6.) 0x774: IA32_HWP_REQUEST: CPU 0-5 :
> raw: FF002E2E : FF002E2E : FF002E2E : FF002E2E : FF002E2E : FF002E2E :
> min: 46 : 46 : 46 : 46 : 46 : 46 :
> max: 46 : 46 : 46 : 46 : 46 : 46 :
> des: 0 : 0 : 0 : 0 : 0 : 0 :
> epp: 255 : 255 : 255 : 255 : 255 : 255 :
> act: 0 : 0 : 0 : 0 : 0 : 0 :
> 7.) 0x777: IA32_HWP_STATUS: 4 : high 4 : guaranteed 0 : efficient 0 : lowest 0

The 0xFF EPP value is what the active mode left behind and the passive
mode doesn't touch the EPP at all.

> Then switched to ondemand governor, and put 100% load on 2 CPUs.
> EPP is not as expected, which I don't actually know what to expect,
> but assume 128:
>
> # /home/doug/c/msr-decoder
> How many CPUs?: 6
> 8.) 0x198: IA32_PERF_STATUS : CPU 0-5 : 46 : 46 : 46 : 46 : 46 : 46 :
> B.) 0x770: IA32_PM_ENABLE: 1 : HWP enable
> 1.) 0x19C: IA32_THERM_STATUS: 883B0000
> 2.) 0x1AA: MSR_MISC_PWR_MGMT: 401CC0 EIST enabled Coordination enabled OOB Bit 8 reset OOB Bit 18 reset
> 3.) 0x1B1: IA32_PACKAGE_THERM_STATUS: 882B0000
> 4.) 0x64F: MSR_CORE_PERF_LIMIT_REASONS: 0
> A.) 0x1FC: MSR_POWER_CTL: 3C005D : C1E disable : EEO disable : RHO disable
> 5.) 0x771: IA32_HWP_CAPABILITIES (performance): 10B252E : high 46 : guaranteed 37 : efficient 11 : lowest 1
> 6.) 0x774: IA32_HWP_REQUEST: CPU 0-5 :
> raw: FF002E09 : FF002E0C : FF002E2E : FF002E08 : FF002E2E : FF002E18 :
> min: 9 : 12 : 46 : 8 : 46 : 24 :
> max: 46 : 46 : 46 : 46 : 46 : 46 :
> des: 0 : 0 : 0 : 0 : 0 : 0 :
> epp: 255 : 255 : 255 : 255 : 255 : 255 :
> act: 0 : 0 : 0 : 0 : 0 : 0 :
> 7.) 0x777: IA32_HWP_STATUS: 4 : high 4 : guaranteed 0 : efficient 0 : lowest 0

It is still 0xFF as previously (because the passive mode doesn't
change the EPP).

> For what it's worth, Kernel:
>
> 78b39581ed85 (HEAD -> dtemp) cpufreq: intel_pstate: Implement passive mode with HWP enabled
> c0842fbc1b18 (origin/master, origin/HEAD, master) random32: move the pseudo-random 32-bit definitions to prandom.h
> 2baa85d6927d Merge tag 'acpi-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
> 04084978003c Merge tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Thanks!

\
 
 \ /
  Last update: 2020-08-05 11:37    [W:0.190 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site