lkml.org 
[lkml]   [2020]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] block: tolerate 0 byte discard_granularity in __blkdev_issue_discard()
From
Date
On 2020/8/5 10:46, Ming Lei wrote:
> On Wed, Aug 05, 2020 at 09:54:00AM +0800, Coly Li wrote:
>> On 2020/8/5 07:58, Ming Lei wrote:
>>> On Tue, Aug 04, 2020 at 10:23:32PM +0800, Coly Li wrote:
>>>> When some buggy driver doesn't set its queue->limits.discard_granularity
>>>> (e.g. current loop device driver), discard at LBA 0 on such device will
>>>> trigger a kernel BUG() panic from block/blk-mq.c:563.
>>>>
>>>> [ 955.565006][ C39] ------------[ cut here ]------------
>>>> [ 955.559660][ C39] invalid opcode: 0000 [#1] SMP NOPTI
>>>> [ 955.622171][ C39] CPU: 39 PID: 248 Comm: ksoftirqd/39 Tainted: G E 5.8.0-default+ #40
>>>> [ 955.622171][ C39] Hardware name: Lenovo ThinkSystem SR650 -[7X05CTO1WW]-/-[7X05CTO1WW]-, BIOS -[IVE160M-2.70]- 07/17/2020
>>>> [ 955.622175][ C39] RIP: 0010:blk_mq_end_request+0x107/0x110
>>>> [ 955.622177][ C39] Code: 48 8b 03 e9 59 ff ff ff 48 89 df 5b 5d 41 5c e9 9f ed ff ff 48 8b 35 98 3c f4 00 48 83 c7 10 48 83 c6 19 e8 cb 56 c9 ff eb cb <0f> 0b 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 56 41 54
>>>> [ 955.622179][ C39] RSP: 0018:ffffb1288701fe28 EFLAGS: 00010202
>>>> [ 955.749277][ C39] RAX: 0000000000000001 RBX: ffff956fffba5080 RCX: 0000000000004003
>>>> [ 955.749278][ C39] RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000000
>>>> [ 955.749279][ C39] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
>>>> [ 955.749279][ C39] R10: ffffb1288701fd28 R11: 0000000000000001 R12: ffffffffa8e05160
>>>> [ 955.749280][ C39] R13: 0000000000000004 R14: 0000000000000004 R15: ffffffffa7ad3a1e
>>>> [ 955.749281][ C39] FS: 0000000000000000(0000) GS:ffff95bfbda00000(0000) knlGS:0000000000000000
>>>> [ 955.749282][ C39] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>>> [ 955.749282][ C39] CR2: 00007f6f0ef766a8 CR3: 0000005a37012002 CR4: 00000000007606e0
>>>> [ 955.749283][ C39] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>>>> [ 955.749284][ C39] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
>>>> [ 955.749284][ C39] PKRU: 55555554
>>>> [ 955.749285][ C39] Call Trace:
>>>> [ 955.749290][ C39] blk_done_softirq+0x99/0xc0
>>>> [ 957.550669][ C39] __do_softirq+0xd3/0x45f
>>>> [ 957.550677][ C39] ? smpboot_thread_fn+0x2f/0x1e0
>>>> [ 957.550679][ C39] ? smpboot_thread_fn+0x74/0x1e0
>>>> [ 957.550680][ C39] ? smpboot_thread_fn+0x14e/0x1e0
>>>> [ 957.550684][ C39] run_ksoftirqd+0x30/0x60
>>>> [ 957.550687][ C39] smpboot_thread_fn+0x149/0x1e0
>>>> [ 957.886225][ C39] ? sort_range+0x20/0x20
>>>> [ 957.886226][ C39] kthread+0x137/0x160
>>>> [ 957.886228][ C39] ? kthread_park+0x90/0x90
>>>> [ 957.886231][ C39] ret_from_fork+0x22/0x30
>>>> [ 959.117120][ C39] ---[ end trace 3dacdac97e2ed164 ]---
>>>>
>>>> This is the procedure to reproduce the panic,
>>>> # modprobe scsi_debug delay=0 dev_size_mb=2048 max_queue=1
>>>> # losetup -f /dev/nvme0n1 --direct-io=on
>>>> # blkdiscard /dev/loop0 -o 0 -l 0x200
>>>>
>>>> This is how the BUG() panic triggered by __blkdev_issue_discard(),
>>>> - For a NVMe SSD backing loop device, the driver does not initialize
>>>> its queue->limits.discard_granularity and leaves it to 0.
>>>> - When discard on LBA 0 of the loop device, __blkdev_issue_discard()
>>>> is called before loop device driver code.
>>>> - Inside __blkdev_issue_discard(), when calculating value of
>>>> granularity_aligned_lba by
>>>> granularity_aligned_lba = round_up(sector_mapped,
>>>> q->limits.discard_granularity >> SECTOR_SHIFT);
>>>> because sector_mapped is 0 (at LBA 0 and no partition offset), and
>>>> q->limits.discard_granularity is 0 (by the buggy loop driver), the
>>>> calculated granularity_aligned_lba is 0.
>>>> - The inline function bio_aligned_discard_max_sectors() is defined as
>>>> return round_down(UINT_MAX, q->limits.discard_granularity) >>
>>>> SECTOR_SHIFT;
>>>> when q->limits.discard_granularity is 0 from loop device driver, the
>>>> above calculation returns value 0.
>>>> - Now granularity_aligned_lba and sctor_mapped are 0, req_sectors is
>>>> calculated by the following lines in __blkdev_issue_discard(),
>>>> if (granularity_aligned_lba == sector_mapped)
>>>> req_sects = min_t(sector_t, nr_sects,
>>>> bio_aligned_discard_max_sectors(q));
>>>> because bio_aligned_discard_max_sectors(q) returns 0, req_sects is
>>>> calculated as 0.
>>>> - Now a discard bio is mistakenly initialized as a 0 byte bio by,
>>>> bio->bi_iter.bi_size = req_sects << 9;
>>>> and sent to loop device driver.
>>>> - This discard request is handled by loop device driver by following
>>>> code path,
>>>> loop_handle_cmd => do_req_filebacked => lo_fallocate =>
>>>> file->f_op->fallocate => blkdev_fallocate => blkdev_issue_zeroout =>
>>>> __blkdev_issue_write_zeroes
>>>> - Inside __blkdev_issue_write_zeroes(), a 0 byte length discard bio is
>>>> composed and sent to the backing device of the loop device.
>>>> - In the I/O completion code path, in my case it is,
>>>> blk_done_softirq => nrq->q->mq_ops->complete => nvme_pci_complete_rq
>>>> => nvme_complete_rq => blk_mq_end_request
>>>> inside blk_mq_end_request(), blk_update_request() is called and due to
>>>> req->bio is NULL in previous step, blk_update_request() returns false
>>>> then the BUG() panic in blk_mq_end_request() is triggered.
>>>>
>>>> Although the above panic can be fixed in loop device driver, the generic
>>>> __blkdev_issue_discard() should also be fixed to tolerate the incorrect
>>>> 0 value from queue->limits.discard_granularity, in case some other buggy
>>>> driver makes such mistake again.
>>>>
>>>> This patch checks whether q->limits.discard_granularity is 0 in
>>>> __blkdev_issue_discard() and bio_aligned_discard_max_sectors(). If it is
>>>> 0 from some buggy driver queue, prints a warning oops information and
>>>> set queue_logical_block_size(q) to a local variable discard_granularity.
>>>> This local variable is used in round_up() and round_down() calculation,
>>>> now req_sects won't be 0 and no empty discard request is generated.
>>>>
>>>> Fixes: 9b15d109a6b2 ("block: improve discard bio alignment in __blkdev_issue_discard()")
>>>> Fixes: c52abf563049 ("loop: Better discard support for block devices")
>>>> Reported-by: Ming Lei <ming.lei@redhat.com>
>>>> Signed-off-by: Coly Li <colyli@suse.de>
>>>> Cc: Hannes Reinecke <hare@suse.com>
>>>> Cc: Ming Lei <ming.lei@redhat.com>
>>>> Cc: Xiao Ni <xni@redhat.com>
>>>> Cc: Bart Van Assche <bvanassche@acm.org>
>>>> Cc: Christoph Hellwig <hch@lst.de>
>>>> Cc: Enzo Matsumiya <ematsumiya@suse.com>
>>>> Cc: Jens Axboe <axboe@kernel.dk>
>>>> Cc: Evan Green <evgreen@chromium.org>
>>>> ---
>>>> block/blk-lib.c | 8 +++++++-
>>>> block/blk.h | 9 +++++++--
>>>> 2 files changed, 14 insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/block/blk-lib.c b/block/blk-lib.c
>>>> index 019e09bb9c0e..3017e4cba923 100644
>>>> --- a/block/blk-lib.c
>>>> +++ b/block/blk-lib.c
>>>> @@ -30,6 +30,7 @@ int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
>>>> struct bio *bio = *biop;
>>>> unsigned int op;
>>>> sector_t bs_mask, part_offset = 0;
>>>> + sector_t discard_granularity;
>>>>
>>>> if (!q)
>>>> return -ENXIO;
>>>> @@ -54,6 +55,11 @@ int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
>>>> if (!nr_sects)
>>>> return -EINVAL;
>>>>
>>>> + discard_granularity = q->limits.discard_granularity;
>>>> + /* In case some buggy driver does not set limits.discard_granularity */
>>>> + if (WARN_ON_ONCE(discard_granularity == 0))
>>>> + discard_granularity = queue_logical_block_size(q);
>>>
>>> This code path is supposed to not run in case of zero q->limits.discard_granularity,
>>> and looks it is fine to just warn and return -EINVAL in this case,
>>> see Documentation/ABI/testing/sysfs-block:
>>>
>>> What: /sys/block/<disk>/queue/discard_granularity
>>> Date: May 2011
>>> Contact: Martin K. Petersen <martin.petersen@oracle.com>
>>> Description:
>>> Devices that support discard functionality may
>>> internally allocate space using units that are bigger
>>> than the logical block size. The discard_granularity
>>> parameter indicates the size of the internal allocation
>>> unit in bytes if reported by the device. Otherwise the
>>> discard_granularity will be set to match the device's
>>> physical block size. A discard_granularity of 0 means
>>> that the device does not support discard functionality.
>>>
>>> What we need to fix is loop driver, if it claims to support discard,
>>> q->limits.discard_granularity has to be one valid value.
>>
>> Yes your suggestion is much simpler, let me do it :-)
>
> That is exactly what the following patch does:
>
> https://lore.kernel.org/linux-block/6f642b8a-648e-8b59-067f-6c9f4cc32fa6@suse.de/T/#m82a878277ae7ed6b7a595820112fd13beaa24c99

I meant your suggestion in __blkdev_issue_discard(), in case some other
buggy driver does similar fault in future. Now the v2 patch is much
simpler, please review it and thank you in advance :-)

Coly Li

\
 
 \ /
  Last update: 2020-08-05 04:53    [W:0.045 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site