lkml.org 
[lkml]   [2020]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 4/4] arm64: dts: rockchip: enable rk3328-rock64 usb3 nodes
From
Date
Hi Cameron,

Increase the version number for each new patch serie.

git format-patch -v4 -4 HEAD

In a previous comment I gave a sort example.
However, this patch serie is about usb3, so only touch the things
related to usb3 and leave the &uart2 node (legacy ;) ) untouched.

Improve the way in which your patches are send.

Your previous serie was incomplete.
Submit all patches with the same news server (Gmail for example) that
can handle plain text, because else you get 2 different Message-Ids:
<20200826171230.17041-2-lindsey.stanpoor@gmail.com>
<20200826170623.15469-2-travelvia@airmail.cc>

git send-email --suppress-cc all --annotate --to <..> --cc <..> <patch1
patch2>

Not sure how robh filters patches, but your serie 'must' show up in the
link below or else wait for an eternity to get a ack-by.

https://patchwork.ozlabs.org/project/devicetree-bindings/list/


On 8/26/20 7:12 PM, lindsey.stanpoor@gmail.com wrote:
> From: Cameron Nemo <cnemo@tutanota.com>
>
> Enable USB3 nodes for the rk3328-based PINE Rock64 board.
>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> Signed-off-by: Cameron Nemo <cnemo@tutanota.com>
> ---
> arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 17 +++++++++++++----
> 1 file changed, 13 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
> index 86cfb5c50a94..82c27eab6a52 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
> @@ -363,10 +363,6 @@ &tsadc {
> status = "okay";
> };
>

> -&uart2 {
> - status = "okay";
> -};
> -

> &u2phy {
> status = "okay";
>
> @@ -379,11 +375,24 @@ u2phy_otg: otg-port {
> };
> };
>

> +&uart2 {
> + status = "okay";
> +};
> +

Don't touch/change.

> &usb20_otg {
> dr_mode = "host";
> status = "okay";
> };
>
> +&usbdrd3 {
> + status = "okay";
> +};
> +
> +&usbdrd_dwc3 {
> + dr_mode = "host";
> + status = "okay";
> +};
> +
> &usb_host0_ehci {
> status = "okay";
> };
>

\
 
 \ /
  Last update: 2020-08-31 13:50    [W:0.034 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site