lkml.org 
[lkml]   [2020]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] i2c: npcm7xx: bug fix timeout (usec instead of msec)
On Sun, Aug 30, 2020 at 9:01 PM Andy Shevchenko
<andy.shevchenko@gmail.com> wrote:
>
> On Sun, Aug 30, 2020 at 3:23 PM Tali Perry <tali.perry1@gmail.com> wrote:
>
> >
> > i2c: npcm7xx: bug fix timeout (usec instead of msec)
>
> This commit message is awful. Please read [1] as a tutorial how to
> write a commit messages.
>

Would this be better:
i2c: npcm7xx: Fix microsecond timeout calculation

Inside npcm_i2c_master_xfer() we calculate a timeout for the entire
transaction in microseconds, the calculation was wrong so big i2c
massages would timeout before they ended.
This commit fix that.

> [1]: https://chris.beams.io/posts/git-commit/
>
> ...
>
> > - /* Adaptive TimeOut: astimated time in usec + 100% margin */
> > - timeout_usec = (2 * 10000 / bus->bus_freq) * (2 + nread + nwrite);
> > + /*
> > + * Adaptive TimeOut: estimated time in usec + 100% margin:
> > + * 2: double the timeout for clock stretching case
> > + * 9: bits per transaction (including the ack/nack)
>
> > + * 1000000: micro second in a second
>
> No need. See below.
>
> > + */
>
> > + timeout_usec = (2 * 9 * 1000000 / bus->bus_freq) * (2 + nread + nwrite);
>
> USEC_PER_SEC

OK

>
> > timeout = max(msecs_to_jiffies(35), usecs_to_jiffies(timeout_usec));
> > if (nwrite >= 32 * 1024 || nread >= 32 * 1024) {
> > dev_err(bus->dev, "i2c%d buffer too big\n", bus->num);
>
> --
> With Best Regards,
> Andy Shevchenko



--
Regards,
Avi

\
 
 \ /
  Last update: 2020-08-31 10:00    [W:0.051 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site